just arrived and as per the rest of his stuff they look well made.
will pull my transfer out today and take a heap of photos while i fit it.
| auszookers.com https://auszookers.com/forum/ |
|
| benT's sierra transfer case arms https://auszookers.com/forum/viewtopic.php?f=5&t=28875 |
Page 1 of 2 |
| Author: | shep [ Thu Dec 22, 2011 1:42 am ] |
| Post subject: | benT's sierra transfer case arms |
just arrived and as per the rest of his stuff they look well made. will pull my transfer out today and take a heap of photos while i fit it.
|
|
| Author: | christover1 [ Thu Dec 22, 2011 1:52 am ] |
| Post subject: | Re: benT's sierra transfer case arms |
thats pretty 
|
|
| Author: | mnemonix [ Thu Dec 22, 2011 2:00 am ] |
| Post subject: | Re: benT's sierra transfer case arms |
That looks solid. I'd like to see 1 more piece to join both sides together for added strength, but otherwise it looks like a great upgrade. |
|
| Author: | Rusho [ Thu Dec 22, 2011 2:11 am ] |
| Post subject: | Re: benT's sierra transfer case arms |
There will be a set of these available for raffle in the new year 
|
|
| Author: | shep [ Thu Dec 22, 2011 4:02 am ] |
| Post subject: | Re: benT's sierra transfer case arms |
started by pulling this out really quickly 
gave it a quick clean and started with the long arm. the 2 thick spacers went on the top two mounts and the thin spacer went on the next hole down. 
thin spacer 
reused the original mount bolts. all the bolts needed to be loosely fitted before any could be tightened. 
long arm fitted 
short arm is just a case of pull the appropriate bolts out and using the supplied bolts fit the short arm 
one of the uni's is a bit tight so i will replace it before a test drive. |
|
| Author: | atari4x4 [ Thu Dec 22, 2011 4:08 am ] |
| Post subject: | Re: benT's sierra transfer case arms |
looks like another well made bit of kit from across the ditch.
|
|
| Author: | Rusho [ Thu Dec 22, 2011 4:13 am ] |
| Post subject: | Re: benT's sierra transfer case arms |
atari4x4 wrote: looks like another well made bit of kit from across the ditch.
He's the only kiwi I know that is useful(In a nice way Mr.Ben) 
|
|
| Author: | 94BAZOOKA [ Thu Dec 22, 2011 4:34 am ] |
| Post subject: | Re: benT's sierra transfer case arms |
Looks good How much did it set you back ? |
|
| Author: | SierraDan [ Thu Dec 22, 2011 4:41 am ] |
| Post subject: | Re: benT's sierra transfer case arms |
Didn't know he sold these. I like! |
|
| Author: | steak_knife [ Thu Dec 22, 2011 5:14 am ] |
| Post subject: | Re: benT's sierra transfer case arms |
 Yum!!!!
|
|
| Author: | 93zook [ Thu Dec 22, 2011 9:27 am ] |
| Post subject: | Re: benT's sierra transfer case arms |
look like a good bit of gear. ill be getting some next year for sure
|
|
| Author: | CompTruck [ Thu Dec 22, 2011 12:05 pm ] |
| Post subject: | Re: benT's sierra transfer case arms |
what does this do? is it like a roktoy ring? or whats that other thing? mighty kong? |
|
| Author: | jonno_racing [ Thu Dec 22, 2011 12:19 pm ] |
| Post subject: | Re: benT's sierra transfer case arms |
they look sweet! I think he needs to update his company page on here! I'm about to order some things for the new toy |
|
| Author: | atari4x4 [ Thu Dec 22, 2011 12:21 pm ] |
| Post subject: | Re: benT's sierra transfer case arms |
shep wrote: just arrived and as per the rest of his stuff they look well made.
will pull my transfer out today and take a heap of photos while i fit it. at least now you can update you signature. 
|
|
| Author: | MrRocky [ Thu Dec 22, 2011 12:34 pm ] |
| Post subject: | Re: benT's sierra transfer case arms |
price |
|
| Author: | whincup [ Thu Dec 22, 2011 12:45 pm ] |
| Post subject: | Re: benT's sierra transfer case arms |
MrRocky wrote: price
x2. looks good
|
|
| Author: | shep [ Thu Dec 22, 2011 6:23 pm ] |
| Post subject: | Re: benT's sierra transfer case arms |
cost is $235 so is a absolute bargain |
|
| Author: | royce [ Thu Dec 22, 2011 7:23 pm ] |
| Post subject: | Re: benT's sierra transfer case arms |
CompTruck wrote: what does this do?
is it like a roktoy ring? or whats that other thing? mighty kong? It spreads the load of the transfer twisting onto more mounting points so its harder to tear them out of the case, as well as being stronger than standard so the arms dont bend the roctoy ring was only ever designed as a starting point for making mounts |
|
| Author: | neofitou [ Thu Dec 22, 2011 7:48 pm ] |
| Post subject: | Re: benT's sierra transfer case arms |
Now shep can change his sig. Looks good |
|
| Author: | shep [ Thu Dec 22, 2011 8:03 pm ] |
| Post subject: | Re: benT's sierra transfer case arms |
neofitou wrote: Now shep can change his sig.
Looks good done. 
|
|
| Author: | Rusho [ Thu Dec 22, 2011 8:05 pm ] |
| Post subject: | Re: benT's sierra transfer case arms |
shep wrote: neofitou wrote: Now shep can change his sig. Looks good done. 
|
|
| Author: | remydog05 [ Thu Dec 22, 2011 9:48 pm ] |
| Post subject: | Re: benT's sierra transfer case arms |
He Hasnt got there listed in his business thread yet?? |
|
| Author: | sogone [ Thu Dec 22, 2011 10:39 pm ] |
| Post subject: | Re: benT's sierra transfer case arms |
You plash one now bloke! |
|
| Author: | shep [ Thu Dec 22, 2011 11:24 pm ] |
| Post subject: | Re: benT's sierra transfer case arms |
sogone wrote: You plash one now bloke!
Propper bucking plash even |
|
| Author: | CairnsZook [ Thu Dec 22, 2011 11:39 pm ] |
| Post subject: | Re: benT's sierra transfer case arms |
shep wrote: cost is $235 so is a absolute bargain
Sign me up 
|
|
| Author: | monley [ Fri Dec 23, 2011 2:40 am ] |
| Post subject: | Re: benT's sierra transfer case arms |
Looks like a good bit of kit
|
|
| Author: | BenT [ Fri Dec 23, 2011 6:38 am ] |
| Post subject: | Re: benT's sierra transfer case arms |
Rusho wrote: He's the only kiwi I know that is useful(In a nice way Mr.Ben)
LOL. Thanks Rusho. We send all the useless kiwi's over to you guys! Increases the iq of both countries so they say
Shep has the first set of production arms. I will add them to my for sale thread when I get back home after Christmas on the 5th Jan. $235 includes shipping 
Ben |
|
| Author: | shep [ Sun Dec 25, 2011 9:25 pm ] |
| Post subject: | Re: benT's sierra transfer case arms |
gave it a good test out by dragging my boat around, stock mounts twist with no effort and the new jobbies still look fine. going to drag the tinny 700km in a couple of days and use a bush ramp so if there are any weaknesses that will show any. |
|
| Author: | dp87 [ Mon Dec 26, 2011 12:18 pm ] |
| Post subject: | Re: benT's sierra transfer case arms |
is this made to suit a transfer at normal height or with a transfer lift? i might have to get myself one |
|
| Author: | shep [ Mon Dec 26, 2011 9:14 pm ] |
| Post subject: | Re: benT's sierra transfer case arms |
dp87 wrote: is this made to suit a transfer at normal height or with a transfer lift?
i might have to get myself one mine is standard height however i think i have enough room for a just cruising transfer lift. i only have a 25mm body lift. |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|