| auszookers.com https://auszookers.com/forum/ |
|
| where does the O2 sensor go? https://auszookers.com/forum/viewtopic.php?f=5&t=28960 |
Page 1 of 1 |
| Author: | brando93 [ Sun Dec 25, 2011 11:33 am ] |
| Post subject: | where does the O2 sensor go? |
Converting an 89 SWB vit to EFI, donor is a 94 LWB vit, used the engine and loom. There is a cable coming from the extractor in the exhaust, has a thin spade bit. Was already disconnected when i got the donor car. Can anyone tell me where it joins to? can't seem to find anything anywhere near it. thanks in advance Brandon 
|
|
| Author: | christover1 [ Sun Dec 25, 2011 7:37 pm ] |
| Post subject: | Re: where does the O2 sensor go? |
Mines a 93 LWB EFI. It joins on to a plug on firewall, in line with it. I'll take a photo in a few minutes |
|
| Author: | christover1 [ Sun Dec 25, 2011 7:43 pm ] |
| Post subject: | Re: where does the O2 sensor go? |
Near bottom right of coil 
|
|
| Author: | brando93 [ Mon Dec 26, 2011 9:08 am ] |
| Post subject: | Re: where does the O2 sensor go? |
myne appears to be similar but only one single black cable? as shown in the picture. any idea how it will go? in your pic it looks like it only has one black cable at the bottom, but the plug is four pin and has four cables at the top?? 
|
|
| Author: | christover1 [ Mon Dec 26, 2011 9:17 am ] |
| Post subject: | Re: where does the O2 sensor go? |
Mine is only one black wire. Not sure why it has a 4 pin plug. No idea if other wires have any purpose. Black to black would be my guess, if you have that choice You need to get more expert opinion, but I reckon it will work...hopefully |
|
| Author: | christover1 [ Mon Dec 26, 2011 9:18 am ] |
| Post subject: | Re: where does the O2 sensor go? |
I'll go out and see if I can see color it plugs too brb |
|
| Author: | Bruce [ Mon Dec 26, 2011 9:19 am ] |
| Post subject: | Re: where does the O2 sensor go? |
Fuck your a good AZ member christover1
oppss more rum
|
|
| Author: | christover1 [ Mon Dec 26, 2011 9:24 am ] |
| Post subject: | Re: where does the O2 sensor go? |
3 pins are blanks. o2 wire plugs to a red with purple stripe...its a bit dark, but think I could see that |
|
| Author: | christover1 [ Mon Dec 26, 2011 9:25 am ] |
| Post subject: | Re: where does the O2 sensor go? |
Bruce wrote: Fuck your a good AZ member christover1
oppss more rum AZ gives back too 
|
|
| Author: | Bruce [ Mon Dec 26, 2011 9:30 am ] |
| Post subject: | Re: where does the O2 sensor go? |
christover1 wrote: Bruce wrote: Fuck your a good AZ member christover1 oppss more rum AZ gives back too  WHen ya not a dick like some 
|
|
| Author: | brando93 [ Mon Dec 26, 2011 9:43 am ] |
| Post subject: | Re: where does the O2 sensor go? |
Thanks bud, will give it a go tommorrow appreciate the help!
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|