auszookers.com
https://auszookers.com/forum/

gti engine
https://auszookers.com/forum/viewtopic.php?f=5&t=28961		 Page 1 of 1
Author:  shreks [ Sun Dec 25, 2011 11:59 am ]
Post subject:  gti engine
hi i got a mk2 engine i think :roll: anywayi put the mazda dizzy cap n rotor on and a w022a thermostat housing and the thermostat housing is almost touching the dizzy cap like the thermostat housing pipe needs to be a bit lower what can i try ?? maybe another thermostat housing??
Author:  zookfun [ Sun Dec 25, 2011 7:59 pm ]
Post subject:  Re: gti engine
You can use the thermostat housing off a suzuki swift cino (94-late90s i believe)
Author:  shreks [ Mon Dec 26, 2011 2:19 am ]
Post subject:  Re: gti engine
anyone else or has anyone got a part number or something i tried supercheap and repco
Author:  matty_wall [ Mon Dec 26, 2011 2:33 am ]
Post subject:  Re: gti engine
Go to a wrecker. I paid $11 for a swift one.

Theres a thread somewhere on here that tells you the part number if you want it that bad.
Author:  jonno_racing [ Mon Dec 26, 2011 2:36 am ]
Post subject:  Re: gti engine
I use swift ones. the top coolent pipe needs to run over your exaust.
Author:  shreks [ Mon Dec 26, 2011 9:30 am ]
Post subject:  Re: gti engine
im using a 1.3 sierra thermostat housing
Author:  zookfun [ Mon Dec 26, 2011 9:49 am ]
Post subject:  Re: gti engine
Image
Author:  shreks [ Mon Dec 26, 2011 9:54 am ]
Post subject:  Re: gti engine
what is that 1 for
Author:  atari4x4 [ Mon Dec 26, 2011 10:19 am ]
Post subject:  Re: gti engine
red writing to the left of the 1 says:

Quantity
(quantitie)
Author:  jonno_racing [ Mon Dec 26, 2011 11:14 am ]
Post subject:  Re: gti engine
your trying to use the wrong part.
Author:  jonno_racing [ Mon Dec 26, 2011 11:15 am ]
Post subject:  Re: gti engine
post up a pic of your motor mate
Author:  shreks [ Mon Dec 26, 2011 10:41 pm ]
Post subject:  Re: gti engine
pics
Author:  jonno_racing [ Mon Dec 26, 2011 10:45 pm ]
Post subject:  Re: gti engine
wrong thermistat housing, pointing the wrong way ;) yep that's a mk2/3
Author:  shreks [ Mon Dec 26, 2011 10:45 pm ]
Post subject:  Re: gti engine
1st pic is engine
2nd is with the w022a thermostat housing
and the 3rd is with the sierra thermostat housing
Author:  shreks [ Tue Dec 27, 2011 1:10 am ]
Post subject:  Re: gti engine
does it matter what way it goes
Author:  jonno_racing [ Tue Dec 27, 2011 1:13 am ]
Post subject:  Re: gti engine
yep. I have fucked around with gti cooling a lot..

best method is use a swift thermistat housing and direct it over the top of the exaust. I make and sell a stainless top hose that works perfect.
Author:  Ratty562 [ Tue Dec 27, 2011 1:24 am ]
Post subject:  Re: gti engine
jonno_racing wrote:
yep. I have fucked around with gti cooling a lot..

best method is use a swift thermistat housing and direct it over the top of the exaust. I make and sell a stainless top hose that works perfect.


would this work aswell with the Baleno motor i may be interested in the stainless top hose

thanks matt
Author:  shreks [ Tue Dec 27, 2011 1:54 am ]
Post subject:  Re: gti engine
jonno_racing wrote:
yep. I have fucked around with gti cooling a lot..

best method is use a swift thermistat housing and direct it over the top of the exaust. I make and sell a stainless top hose that works perfect.


do u have a pic of it on motor and what does it matter if it goes over exhaust manifold or under intake manifold well i thought intake side would be a bit cooler
Author:  jonno_racing [ Tue Dec 27, 2011 2:02 am ]
Post subject:  Re: gti engine
if u go under intake you will get airlock issues..



Posibly belino, however hard to make without car.
Author:  jonno_racing [ Tue Dec 27, 2011 2:08 am ]
Post subject:  Re: gti engine
Image

Image
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/