The BenT kit is very good. AFAIK the auto plugs can be left out and it won't matter to the ECU
| auszookers.com https://auszookers.com/forum/ |
|
| 1.6 swap https://auszookers.com/forum/viewtopic.php?f=5&t=29037 |
Page 1 of 1 |
| Author: | adamp493 [ Wed Dec 28, 2011 5:24 am ] |
| Post subject: | 1.6 swap |
i am about to do a 1.6 swap into my sj80 1. just wondering if it would matter that the engine is coming out of an auto vitara, will this matter with the computer for the swap as i am going to be keeping the manual box for the sierra. 2. i am hoping to get away with just running a scoop on the bonnet rather then installing a body lift so the engine wont foul, just wondering also if the engine would foul anywhere else, i.e exhaust manifold or anything any input would be extremely appreciated thanks |
|
| Author: | reeceh [ Wed Dec 28, 2011 5:29 am ] |
| Post subject: | Re: 1.6 swap |
Lowrange offroad do a engine mount that lowers the engine. Called the petroworks kit, I put it on mine when I did the 1.6 swap. |
|
| Author: | adamp493 [ Wed Dec 28, 2011 5:40 am ] |
| Post subject: | Re: 1.6 swap |
the wait was too long so went for the one advertised on auszooks |
|
| Author: | Rusho [ Wed Dec 28, 2011 6:30 am ] |
| Post subject: | Re: 1.6 swap |
The BenT kit is very good. AFAIK the auto plugs can be left out and it won't matter to the ECU
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|