Fatzook wrote:
Only coily's come with a high pinion front. If you want any other high pinions you will need custom reverse cut gears. Or flip your housings.
So does the almighty Jimny
| auszookers.com https://auszookers.com/forum/ |
|
| high pinion or reverse pinion https://auszookers.com/forum/viewtopic.php?f=5&t=29072 |
Page 1 of 1 |
| Author: | ashzook94 [ Thu Dec 29, 2011 3:19 am ] |
| Post subject: | high pinion or reverse pinion |
has anyone done the hole high pinion thing on sierra's to lift up the pinion higher (mines a wt) |
|
| Author: | Scrawny [ Thu Dec 29, 2011 4:10 am ] |
| Post subject: | Re: high pinion or reverse pinion |
Front or rear? What are you trying to achieve? |
|
| Author: | Fatzook [ Thu Dec 29, 2011 4:19 am ] |
| Post subject: | Re: high pinion or reverse pinion |
Only coily's come with a high pinion front. If you want any other high pinions you will need custom reverse cut gears. Or flip your housings. |
|
| Author: | suzooky87 [ Thu Dec 29, 2011 4:59 am ] |
| Post subject: | Re: high pinion or reverse pinion |
Fatzook wrote: Only coily's come with a high pinion front. If you want any other high pinions you will need custom reverse cut gears. Or flip your housings.
So does the almighty Jimny
|
|
| Author: | Gwagensteve [ Thu Dec 29, 2011 6:49 am ] |
| Post subject: | Re: high pinion or reverse pinion |
Front or rear? As far as I know, neither a coil or Jimny high pinion front diff will bolt in to a WT front. There's little point using one in the rear - a high pinion diff used in the rear is about 20% weaker than a normal rear diff. Steve. |
|
| Author: | jonno_racing [ Thu Dec 29, 2011 8:12 am ] |
| Post subject: | Re: high pinion or reverse pinion |
Gwagensteve wrote: Front or rear?
As far as I know, neither a coil or Jimny high pinion front diff will bolt in to a WT front. sj80 front will bolt in.I think if u change side gears in diff it will work. |
|
| Author: | ashzook94 [ Thu Dec 29, 2011 10:00 pm ] |
| Post subject: | Re: high pinion or reverse pinion |
i don't want to use a coily front diff, and other than that there is no real way to do this...??? |
|
| Author: | jonno_racing [ Thu Dec 29, 2011 10:04 pm ] |
| Post subject: | Re: high pinion or reverse pinion |
then id say no. |
|
| Author: | Zook_Fan [ Thu Dec 29, 2011 10:04 pm ] |
| Post subject: | Re: high pinion or reverse pinion |
Fatzook wrote: If you want any other high pinions you will need custom reverse cut gears. Or flip your housings.
Or that.. Why do you want to do it anyway? |
|
| Author: | ashzook94 [ Fri Dec 30, 2011 1:04 am ] |
| Post subject: | Re: high pinion or reverse pinion |
since the car is so low im trying to lift them up so the don't hit rocks etc |
|
| Author: | TZAR [ Fri Dec 30, 2011 7:56 am ] |
| Post subject: | Re: high pinion or reverse pinion |
What size tyres are you running???? |
|
| Author: | ajsr [ Fri Dec 30, 2011 8:45 am ] |
| Post subject: | Re: high pinion or reverse pinion |
Ive got a coily high pinion in the rear of my car, with an air locker. seems to work ok |
|
| Author: | ashzook94 [ Fri Dec 30, 2011 11:06 am ] |
| Post subject: | Re: high pinion or reverse pinion |
31's then when they get low 33's |
|
| Author: | jonno_racing [ Fri Dec 30, 2011 11:28 am ] |
| Post subject: | Re: high pinion or reverse pinion |
ajsr wrote: Ive got a coily high pinion in the rear of my car, with an air locker.
seems to work ok nothing. fits a coiler..... oh wait |
|
| Author: | Zook_Fan [ Fri Dec 30, 2011 11:44 am ] |
| Post subject: | Re: high pinion or reverse pinion |
Where in the Rockhampton area have you been hung up on your pinion carrier? I'm on 235's and have never experienced that. |
|
| Author: | ashzook94 [ Fri Dec 30, 2011 12:01 pm ] |
| Post subject: | Re: high pinion or reverse pinion |
out at the water towers back when it had 235's, yes it has 31's now but i wouldn't mind doin it when i pull my diffs apart do it all at once |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|