I have a 940 and its too short
| auszookers.com https://auszookers.com/forum/ |
|
| Jimny Belt Size https://auszookers.com/forum/viewtopic.php?f=5&t=29174 |
Page 1 of 1 |
| Author: | Bugsta [ Mon Jan 02, 2012 3:13 am ] |
| Post subject: | Jimny Belt Size |
I bought a couple of spare belts for the Jimny a while ago. Turns out neither are correct. What is the correct length for the late Jimny for the Power Steering and Air con? |
|
| Author: | zuk85 [ Mon Jan 02, 2012 3:19 am ] |
| Post subject: | Re: Jimny Belt Size |
its not 4PK835?? without P/S only A/C its 4PK785 |
|
| Author: | Bugsta [ Mon Jan 02, 2012 3:20 am ] |
| Post subject: | Re: Jimny Belt Size |
I have a 940 and its too short
|
|
| Author: | zuk85 [ Mon Jan 02, 2012 3:27 am ] |
| Post subject: | Re: Jimny Belt Size |
holy shit :O can u adjust the P/S to a lower level??? or is it maxed already? |
|
| Author: | Bugsta [ Mon Jan 02, 2012 3:30 am ] |
| Post subject: | Re: Jimny Belt Size |
What do you mean lower level? Its fixed. The tensioner pulley is the adjustment. I just did the string test and it worked out pretty much exactly 940 with the tensioner pulley at outer position and no way no how was that 940 belt going on. I guess I need about 955. |
|
| Author: | suzooky87 [ Mon Jan 02, 2012 4:20 am ] |
| Post subject: | Re: Jimny Belt Size |
its a 960 mate, makes life a shit load easier 
|
|
| Author: | suzooky87 [ Mon Jan 02, 2012 4:21 am ] |
| Post subject: | Re: Jimny Belt Size |
zuk85 wrote: its not 4PK835??
without P/S only A/C its 4PK785 the 835 is for the alternator
|
|
| Author: | zuk85 [ Mon Jan 02, 2012 5:17 am ] |
| Post subject: | Re: Jimny Belt Size |
I have not had the pleasure of seeing a jimny P/S setup, Just some other cars i have seen the P/S pump can be adjusted |
|
| Author: | Bugsta [ Tue Jan 03, 2012 12:17 am ] |
| Post subject: | Re: Jimny Belt Size |
Yep. Didn't see a reply by the time I needed so I got a 950 and 960. 960 was the winner. And yes, confirmed, 835 is the alternator belt. |
|
| Author: | suzooky87 [ Tue Jan 03, 2012 3:43 am ] |
| Post subject: | Re: Jimny Belt Size |
| thats cool mate.
|
|
| Author: | 11acb [ Mon Jan 27, 2014 8:13 pm ] |
| Post subject: | Re: Jimny Belt Size |
Wondering how or is there an easy way to remove and replace this belt |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|