| auszookers.com https://auszookers.com/forum/ |
|
| Castor shims https://auszookers.com/forum/viewtopic.php?f=5&t=29242 |
Page 1 of 1 |
| Author: | dono1 [ Wed Jan 04, 2012 1:13 am ] |
| Post subject: | Castor shims |
Where can I get some castor shims for a 92 sierra? I know lowrange has them but postage is more than the shims! Does anyone in aus do them? |
|
| Author: | want33s [ Wed Jan 04, 2012 8:03 am ] |
| Post subject: | Re: Castor shims |
Just grind down some 50x5 flat bar. |
|
| Author: | TZAR [ Wed Jan 04, 2012 10:08 am ] |
| Post subject: | Re: Castor shims |
any truck wheel alignment place will have them but you will need to make them narrower with the grinder |
|
| Author: | Hybrid [ Thu Jan 05, 2012 10:30 am ] |
| Post subject: | Re: Castor shims |
Superior Engineering has them for sierras. Snake racing has hilux ones that can be be ground down to the right width. I've had a set from both places. Superior would be my pick though as they are made specifically for the sierra. The only reason I did cut down ones from snake was because they were the only caster wedges I could find on Aus sites at the time. It was pre-superior website days. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|