dono1 wrote:
Its a highmount manifold, mine motor has 4 round ports and 4 square ports.
8 port 4 cylinder exhaust manifold?
| auszookers.com https://auszookers.com/forum/ |
|
| Turbo manifold? https://auszookers.com/forum/viewtopic.php?f=5&t=29478 |
Page 1 of 1 |
| Author: | dono1 [ Wed Jan 11, 2012 7:45 pm ] |
| Post subject: | Turbo manifold? |
Will a Turbo manifold from a GTI G13b fit on a G13a? |
|
| Author: | Gwagensteve [ Wed Jan 11, 2012 7:56 pm ] |
| Post subject: | Re: Turbo manifold? |
No. Steve |
|
| Author: | dono1 [ Wed Jan 11, 2012 8:03 pm ] |
| Post subject: | Re: Turbo manifold? |
Damn! the pattern looks the same! |
|
| Author: | MrRocky [ Wed Jan 11, 2012 8:17 pm ] |
| Post subject: | Re: Turbo manifold? |
engine mount ? |
|
| Author: | oozuk [ Wed Jan 11, 2012 9:14 pm ] |
| Post subject: | Re: Turbo manifold? |
not even close !! the G13b GTi exhaust ports are round and the G13a and G13b 8v exhaust ports are rectangle, and both with totally different stud patterns. If you want to use an exhaust manifold from a GTi then maybe (if it's not a cast turbo manifold) you could cut off the faceplate and weld on one to suit a G13a |
|
| Author: | mnemonix [ Wed Jan 11, 2012 11:17 pm ] |
| Post subject: | Re: Turbo manifold? |
Stud pattern and port size/location aside, You will almost never be able to use a manifold designed for FWD purposes (swift gti) in your RWD sierra due to the position it will locate the turbo in. Most FWD manifolds are designed to low mount the turbo, which in our application will put it smack back in the middle of the chassis rail or engine mount. |
|
| Author: | dono1 [ Thu Jan 12, 2012 3:49 am ] |
| Post subject: | Re: Turbo manifold? |
Its a highmount manifold, mine motor has 4 round ports and 4 square ports. |
|
| Author: | atari4x4 [ Thu Jan 12, 2012 4:46 am ] |
| Post subject: | Re: Turbo manifold? |
dono1 wrote: Its a highmount manifold, mine motor has 4 round ports and 4 square ports.
8 port 4 cylinder exhaust manifold?
|
|
| Author: | SierraDan [ Thu Jan 12, 2012 4:55 am ] |
| Post subject: | Re: Turbo manifold? |
atari4x4 wrote: dono1 wrote: Its a highmount manifold, mine motor has 4 round ports and 4 square ports. 8 port 4 cylinder exhaust manifold? Less back pressure for more flex.. |
|
| Author: | Fatzook [ Thu Jan 12, 2012 5:10 am ] |
| Post subject: | Re: Turbo manifold? |
atari4x4 wrote: dono1 wrote: Its a highmount manifold, mine motor has 4 round ports and 4 square ports. 8 port 4 cylinder exhaust manifold? 4 of those will be inlet 
|
|
| Author: | atari4x4 [ Thu Jan 12, 2012 5:29 am ] |
| Post subject: | Re: Turbo manifold? |
Fatzook wrote: atari4x4 wrote: dono1 wrote: Its a highmount manifold, mine motor has 4 round ports and 4 square ports. 8 port 4 cylinder exhaust manifold? 4 of those will be inlet bwhahahaha, i know that... but an 8 port turbo manifold would look like an octopus. |
|
| Author: | dono1 [ Thu Jan 12, 2012 8:12 am ] |
| Post subject: | Re: Turbo manifold? |
Fatzook wrote: atari4x4 wrote: dono1 wrote: Its a highmount manifold, mine motor has 4 round ports and 4 square ports. 8 port 4 cylinder exhaust manifold? 4 of those will be inlet Really???? |
|
| Author: | Fatzook [ Thu Jan 12, 2012 9:16 am ] |
| Post subject: | Re: Turbo manifold? |
dono1 wrote: Fatzook wrote: atari4x4 wrote: dono1 wrote: Its a highmount manifold, mine motor has 4 round ports and 4 square ports. 8 port 4 cylinder exhaust manifold? 4 of those will be inlet Really???? You for real? 
|
|
| Author: | atari4x4 [ Thu Jan 12, 2012 9:18 am ] |
| Post subject: | Re: Turbo manifold? |
Fatzook wrote: dono1 wrote: Fatzook wrote: atari4x4 wrote: dono1 wrote: Its a highmount manifold, mine motor has 4 round ports and 4 square ports. 8 port 4 cylinder exhaust manifold? 4 of those will be inlet Really???? You for real? i assume he's talking about exhaust & intake valves...
|
|
| Author: | stocker [ Thu Jan 12, 2012 9:38 am ] |
| Post subject: | Re: Turbo manifold? |
Just connect them together  perpetual motion will be created... Or am I missing something
|
|
| Author: | Rusho [ Thu Jan 12, 2012 10:01 am ] |
| Post subject: | Re: Turbo manifold? |
stocker wrote: Or am I missing something
Yep....one of these 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|