| auszookers.com https://auszookers.com/forum/ |
|
| Putting a 4" lift https://auszookers.com/forum/viewtopic.php?f=5&t=29490 |
Page 1 of 1 |
| Author: | chazbode [ Thu Jan 12, 2012 5:10 am ] |
| Post subject: | Putting a 4" lift |
hi I am looking at a lift for my swb suzuki vitara hard top and found a 2" body lift and spacers for a 2" suspension lift. has anyone done this and will I need to extend or modify anything at all ? Or is it a straight bolt on job ? Help would be appreciated |
|
| Author: | Rusho [ Thu Jan 12, 2012 7:46 am ] |
| Post subject: | Re: Putting a 4" lift |
All of that is only going to lift the height of the car, it will do nothing for suspension travel and articulation |
|
| Author: | alexvitara [ Thu Jan 12, 2012 8:41 am ] |
| Post subject: | Re: Putting a 4" lift |
what are you trying to achieve? |
|
| Author: | steak_knife [ Thu Jan 12, 2012 8:52 am ] |
| Post subject: | Re: Putting a 4" lift |
alexvitara wrote: what are you trying to achieve?
Height....
|
|
| Author: | alexvitara [ Thu Jan 12, 2012 9:05 am ] |
| Post subject: | Re: Putting a 4" lift |
steak_knife wrote: alexvitara wrote: what are you trying to achieve? Height.... ![]() but why?
|
|
| Author: | steak_knife [ Thu Jan 12, 2012 9:07 am ] |
| Post subject: | Re: Putting a 4" lift |
alexvitara wrote: steak_knife wrote: alexvitara wrote: what are you trying to achieve? Height.... ![]() but why? To be higher....
I agree with Mr Rusho, you will "look" like a "capable" 4by, but those 2 lift's will have no benefit other than letting you put bigger tyre's on. |
|
| Author: | stocker [ Thu Jan 12, 2012 9:35 am ] |
| Post subject: | Re: Putting a 4" lift |
Yayyy for Calmini lift. Bar their shocks ( they are shocking I have now blown all four within 7000kms ) it's a good basis to get your vit higher and articulating further And not that expensive. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|