auszookers.com
https://auszookers.com/forum/

transfer case question
https://auszookers.com/forum/viewtopic.php?f=5&t=29501		 Page 1 of 1
Author:  2.7turbojimny [ Thu Jan 12, 2012 5:48 pm ]
Post subject:  transfer case question
can anybody tell me the differance between jimny manual and electric transfer cases
Author:  89_tintop [ Thu Jan 12, 2012 5:54 pm ]
Post subject:  Re: transfer case question
What do you want to know.

The ratios are different.
One is a manual shift (has a stick) other is electronic
Manual can be swapped into the electric spot. Will give a reduction in gearing

What kind of info do you want)
Author:  2.7turbojimny [ Thu Jan 12, 2012 6:08 pm ]
Post subject:  Re: transfer case question
thats basically what i wanted to know thanks is the back side of the casing the same? and can the electric gears be put in the manual using the manual shift
Author:  Bugsta [ Thu Jan 12, 2012 9:03 pm ]
Post subject:  Re: transfer case question
VVT Jimny Manual
High 1:1
Low 2:1

VVT Jimny Auto
High 1.32:1
Low 2.64:1

Non VVT Jimny Auto/Manual
High 1.32:1
Low 2.145:1

2.7turbojimny wrote:
thats basically what i wanted to know thanks is the back side of the casing the same?

Yes

2.7turbojimny wrote:
and can the electric gears be put in the manual using the manual shift

No

The gearbox and diff ratios are also different between manual and auto, and VVT/non VVT. Seems no 2 models/series are the same.
Author:  Bugsta [ Thu Jan 12, 2012 9:04 pm ]
Post subject:  Re: transfer case question
"back side of the casing" I assumed you are talking about the prop shaft connection. Yes. Zukenutter may be able to answer if you mean something else.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/