he run's the 1.6 Vit.... sounds like someone is checking for bent strut towers or making a strut brace.
jesse, i'm not sure on the measurements but are the towers centred in the "hole" in the body?
| auszookers.com https://auszookers.com/forum/ |
|
| vitara strut measurement https://auszookers.com/forum/viewtopic.php?f=5&t=29536 |
Page 1 of 1 |
| Author: | jesse_vit [ Fri Jan 13, 2012 10:23 pm ] |
| Post subject: | vitara strut measurement |
hey auszookers, i was just wondering if any of you fellow vitara owners could get a measurement of the gap between the struts at the top (under the bonnet) center to center. if anyone could help that would be great thanks. |
|
| Author: | TZAR [ Fri Jan 13, 2012 10:28 pm ] |
| Post subject: | Re: vitara strut measurement |
which model vitara???? Cause I think the 2.0l are wider |
|
| Author: | atari4x4 [ Fri Jan 13, 2012 11:06 pm ] |
| Post subject: | Re: vitara strut measurement |
he run's the 1.6 Vit.... sounds like someone is checking for bent strut towers or making a strut brace.
jesse, i'm not sure on the measurements but are the towers centred in the "hole" in the body? |
|
| Author: | fire60 [ Fri Jan 13, 2012 11:42 pm ] |
| Post subject: | Re: vitara strut measurement |
96 LWB 935mm centre to centre of strut shafts |
|
| Author: | fire60 [ Fri Jan 13, 2012 11:43 pm ] |
| Post subject: | Re: vitara strut measurement |
96 LWB 935mm centre to centre of strut shafts |
|
| Author: | jesse_vit [ Sat Jan 14, 2012 2:00 am ] |
| Post subject: | Re: vitara strut measurement |
its a 89 1.6 swb vitara. sorry i forgot to mention that. |
|
| Author: | alexvitara [ Sat Jan 14, 2012 5:02 am ] |
| Post subject: | Re: vitara strut measurement |
Jumping sand dunes 
|
|
| Author: | atari4x4 [ Sat Jan 14, 2012 5:12 am ] |
| Post subject: | Re: vitara strut measurement |
pics
|
|
| Author: | christover1 [ Sat Jan 14, 2012 8:33 am ] |
| Post subject: | Re: vitara strut measurement |
930mm on a LWB 93 1.6 Vit As best as I could see in the dark. |
|
| Author: | alexvitara [ Sat Jan 14, 2012 12:41 pm ] |
| Post subject: | Re: vitara strut measurement |
mine didnt permanently bend but they flexed enough to smash into the body and bend the body around the strut tower. i wanted to make a strut brace to but there is not enough room above the air box on mine without a BL. |
|
| Author: | jesse_vit [ Sun Jan 15, 2012 6:44 am ] |
| Post subject: | Re: vitara strut measurement |
thanks for the measurements guys. turns out there not bent, but dad is making me a strut brace 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|