It is currently Wed Jul 22, 2026 7:32 pm
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 10 posts ] 
Author Message

Offline
az supporter
az supporter
User avatar

Joined: Mon Jul 21, 2008 11:30 pm
Posts: 1785
Location: perth, WA
Vehicle: 85' LWB Sierra, 01' S15

Post Posted: Wed Sep 24, 2008 6:19 am 
Reply with quote Top  
hey guys,

after a bit of info for a mate. He has a 92' sierra with 2inch lifted king springs and rancho 5000 shocks. Atm his rancho shocks aren't long enough to allow much downwards travel and as a result is lifting the wheels very easily and not articulating as well as he would like. He has bought some 2 inch extended shakles but can't put them on as it would mean that his current shocks wouldn't be long enough. I have seen that people use the hilux/commy shock combination. I was just wondering if this combination on his current set up would provide him with enough travel to fit the extended shackels in and also provide enough downwards travel so it can articulate properly?

and has anyone had any experience with the hilux/commy gabriel shocks you can get from super cheap?

any help/advice would be great. thanks.

 Profile  

Offline
az supporter
az supporter

Joined: Tue May 27, 2008 11:30 pm
Posts: 1791
Location: Central coast NSW

Post Posted: Wed Sep 24, 2008 2:05 pm 
Reply with quote Top  
i have used the gabriel commo wagon shocks on the front, they are pretty good but need a bumpstop ext (about 25mm or 35mm) to not bottom out and have plenty of drop for most people.

hilux in the rear need to be mounted inboard as they are alot longed, a stuffer shock and have diffrent size bushes. they work well as well

 Profile  

Offline
lesspostingmorewheeling
lesspostingmorewheeling
User avatar

Joined: Tue May 06, 2008 11:30 pm
Posts: 2236
Location: Under Down Under

Post Posted: Wed Sep 24, 2008 7:41 pm 
Reply with quote Top  
i got gabriel shocks in mine too the same ones that super cheap sell but i didn't get them at super cheap prices :(
if i remember right they were
part # 81147 for your back shocks - i think they are out of a liteace
part # 81340 for your front shocks - i think they are lowered vn wagon rears
they fit straight on and they are about 3-4 inches longer extened than the shocks that came on mine (i think the shocks that came on mine might be longer than standard but i'm not sure)

 Profile  

Offline

Joined: Mon Jul 28, 2008 11:30 pm
Posts: 128
Location: perth

Post Posted: Wed Sep 24, 2008 11:49 pm 
Reply with quote Top  
also how have you found the ride quality and handling etc??

 Profile  

Offline
User avatar

Joined: Sat May 10, 2008 11:30 pm
Posts: 3273
Location: melbourne

Post Posted: Thu Sep 25, 2008 12:14 am 
Reply with quote Top  
hope people are extending bumpstops to suit....... :roll:

_________________
builder of custom road legal zooks......and stuff.

 Profile  

Offline
omnipotent being
omnipotent being
User avatar

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Post Posted: Thu Sep 25, 2008 12:25 am 
Reply with quote Top  
dont you know you have to extend your bumpstops till they are so long you actually get another 3 inches of lift :)
its what all the cool people do :)

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Thu Mar 13, 2008 10:30 pm
Posts: 4530
Location: Toowoomba
Vehicle: Maruti and LJ80's

Post Posted: Thu Sep 25, 2008 12:59 am 
Reply with quote Top  
that would make for one hell of a terrible ride

 Profile  

Offline
lesspostingmorewheeling
lesspostingmorewheeling
User avatar

Joined: Tue May 06, 2008 11:30 pm
Posts: 2236
Location: Under Down Under

Post Posted: Thu Sep 25, 2008 4:09 am 
Reply with quote Top  
Zook_Fan wrote:
that would make for one hell of a terrible ride


but at least it would make you cool :P

 Profile  

Offline
lesspostingmorewheeling
lesspostingmorewheeling
User avatar

Joined: Tue May 06, 2008 11:30 pm
Posts: 2236
Location: Under Down Under

Post Posted: Thu Sep 25, 2008 4:10 am 
Reply with quote Top  
jamienoble wrote:
also how have you found the ride quality and handling etc??


they are a fair bit stiffer than the standard ones but so far they seem smoother

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Jul 21, 2008 11:30 pm
Posts: 1785
Location: perth, WA
Vehicle: 85' LWB Sierra, 01' S15

Post Posted: Fri Sep 26, 2008 7:05 am 
Reply with quote Top  
thanks for the help guys. this shock set up should be fine for running 2inch extended shakles and a 2inch spring lift??????

_________________
79' LJ80 (sold) :(
95' & 97' sierra (sold)

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 328 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours