Hey mate I've got a 2" suspention lift and got 31s muddies and i also have a complete 2" body lift kit never be open that I'm selling for $210.
| auszookers.com https://auszookers.com/forum/ |
|
| 31" tyers on my zook https://auszookers.com/forum/viewtopic.php?f=5&t=30081 |
Page 1 of 1 |
| Author: | sj70zuki [ Wed Feb 01, 2012 8:52 am ] |
| Post subject: | 31" tyers on my zook |
hay guys my zook is a sj70 m1993 seirra and i was woundering if i could put 31" muddies on it i have a 2" suspention lift should i get a body lift and how would they perform |
|
| Author: | spiderman [ Wed Feb 01, 2012 9:30 am ] |
| Post subject: | Re: 31" tyers on my zook |
Hey mate I've got a 2" suspention lift and got 31s muddies and i also have a complete 2" body lift kit never be open that I'm selling for $210.
|
|
| Author: | zooky08 [ Wed Feb 01, 2012 10:08 am ] |
| Post subject: | Re: 31" tyers on my zook |
Don't need bodylift. Just hammer your guards and put bumper stop extensions in. Another choice is a virtual lift. Also get some gears why you at it 
|
|
| Author: | atari4x4 [ Wed Feb 01, 2012 10:43 am ] |
| Post subject: | Re: 31" tyers on my zook |
ajsr's sierra 34's & no lift viewtopic.php?f=4&t=5148&p=545199#p545199  low is still the new lift & has been for a while now 
|
|
| Author: | SierraDan [ Wed Feb 01, 2012 10:54 am ] |
| Post subject: | Re: 31" tyers on my zook |
atari4x4 wrote: low is still the new lift & has been for a while now Yeah especially for just 31's. Twin locked and reduction gears will get you almost everywhere on 31's. Bit of suspension travel as well will help get you everywhere else. |
|
| Author: | jonfromhamilton [ Wed Feb 01, 2012 8:10 pm ] |
| Post subject: | Re: 31" tyers on my zook |
Yeah especially for just 31's. Twin locked and reduction gears will get you almost everywhere on 31's. Bit of suspension travel as well will help get you everywhere else.[/quote] that's my plan
|
|
| Author: | TasRat [ Wed Feb 01, 2012 8:28 pm ] |
| Post subject: | Re: 31" tyers on my zook |
I've got Spring & 50mm body lift with 31 x 10.5s, guards are hammered. On big flex & full lock one tire clips the top of the shock tower, & occasionally rear corner of guard (might need another hammer) with reduction gears and rear locker it goes every where - really amazing, only thing that stops it is diff clearance, highway's not it's stong point How do you get away with 34's? |
|
| Author: | SierraDan [ Wed Feb 01, 2012 8:29 pm ] |
| Post subject: | Re: 31" tyers on my zook |
^ you've stuffed up somehow.. |
|
| Author: | TasRat [ Wed Feb 01, 2012 8:32 pm ] |
| Post subject: | Re: 31" tyers on my zook |
any suggestions? |
|
| Author: | SierraDan [ Wed Feb 01, 2012 8:37 pm ] |
| Post subject: | Re: 31" tyers on my zook |
Can't tell you from this distance. But with 100mm lift (spring and body) my 31's would never know what it was like to contact the body. |
|
| Author: | atari4x4 [ Wed Feb 01, 2012 8:38 pm ] |
| Post subject: | Re: 31" tyers on my zook |
TasRat wrote: any suggestions? read the thread that i posted with the pics.... will give you an idea on how to fit 34's with no lift |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|