| auszookers.com https://auszookers.com/forum/ |
|
| will a swift carby go onta a sierra?? https://auszookers.com/forum/viewtopic.php?f=5&t=30094 |
Page 1 of 1 |
| Author: | jacca [ Wed Feb 01, 2012 2:47 pm ] |
| Post subject: | will a swift carby go onta a sierra?? |
well my sierra carby has had it and just wondering if a carby off a g13ba swift or even a 1.6 g16a would bolt onto the sierra manifold cheers?? |
|
| Author: | IN2DEP [ Thu Feb 02, 2012 2:07 pm ] |
| Post subject: | Re: will a swift carby go onta a sierra?? |
I cant see why not, the swift and sierra are both g13ba other words the same motor anless you have a 3cyl swift witch they are diff |
|
| Author: | matty_wall [ Thu Feb 02, 2012 2:21 pm ] |
| Post subject: | Re: will a swift carby go onta a sierra?? |
i went to a wrecker to do the same thing. All the carbys i pulled off swifts had different bolt spacing to a sierra carb. |
|
| Author: | jacca [ Thu Feb 02, 2012 3:07 pm ] |
| Post subject: | Re: will a swift carby go onta a sierra?? |
so is there any other cars that might have the same carby i am thinking maybe a ke70 as they run an aisin carb but unsure if it would fit any suggestions would be great |
|
| Author: | dougies_tx5turbo [ Thu Feb 02, 2012 5:55 pm ] |
| Post subject: | Re: will a swift carby go onta a sierra?? |
i got a webber for sale if that helps |
|
| Author: | foolishme83 [ Sun Nov 10, 2013 2:48 pm ] |
| Post subject: | Re: will a swift carby go onta a sierra?? |
so does anyone know if a swift g13ba carb will bolt onto a sierra manifold? |
|
| Author: | Rhino [ Sun Nov 10, 2013 11:57 pm ] |
| Post subject: | Re: will a swift carby go onta a sierra?? |
No they do not, they have a totally different bolt spacing. Also the throttle cable come in at the wrong direction.. |
|
| Author: | PurpleZOOK [ Mon Nov 11, 2013 6:00 pm ] |
| Post subject: | Re: will a swift carby go onta a sierra?? |
viewtopic.php?f=5&t=43795 |
|
| Author: | losfer [ Wed Nov 13, 2013 7:13 pm ] |
| Post subject: | Re: will a swift carby go onta a sierra?? |
the earlier swifts : ie 1984-1988 use the same carby as sierra although a slightly different external configuration , internals are the same. the jetting is different though , the primary jet is a tad smaller, but the secondary jet is much larger , ive seen everything in earlier swifts from 117-141 secondary and everything in between , always see a 104 or 105 in a sierra nothing ever different , which made me curious as why so many different jets in the early swifts. What i put it down to was the sierra in that era only come in 1 option , same engine , same gearbox , one configuration , whereas the swift would come in 3 cylinder and 4 cylinder , auto and manual , a multiple of different configs which each requires a different jetting to another. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|