| Author |
Message |
hooki

az supporter
Joined: Mon Jul 21, 2008 11:30 pm Posts: 1785 Location: perth, WA
Vehicle: 85' LWB Sierra, 01' S15
|
 Posted: Wed Sep 24, 2008 6:19 am |
|
|
hey guys,
after a bit of info for a mate. He has a 92' sierra with 2inch lifted king springs and rancho 5000 shocks. Atm his rancho shocks aren't long enough to allow much downwards travel and as a result is lifting the wheels very easily and not articulating as well as he would like. He has bought some 2 inch extended shakles but can't put them on as it would mean that his current shocks wouldn't be long enough. I have seen that people use the hilux/commy shock combination. I was just wondering if this combination on his current set up would provide him with enough travel to fit the extended shackels in and also provide enough downwards travel so it can articulate properly?
and has anyone had any experience with the hilux/commy gabriel shocks you can get from super cheap?
any help/advice would be great. thanks.
|
|
|
|
 |
Brett

az supporter
Joined: Tue May 27, 2008 11:30 pm Posts: 1791 Location: Central coast NSW
|
 Posted: Wed Sep 24, 2008 2:05 pm |
|
|
i have used the gabriel commo wagon shocks on the front, they are pretty good but need a bumpstop ext (about 25mm or 35mm) to not bottom out and have plenty of drop for most people.
hilux in the rear need to be mounted inboard as they are alot longed, a stuffer shock and have diffrent size bushes. they work well as well
|
|
|
|
 |
Mike

lesspostingmorewheeling
Joined: Tue May 06, 2008 11:30 pm Posts: 2236 Location: Under Down Under
|
 Posted: Wed Sep 24, 2008 7:41 pm |
|
i got gabriel shocks in mine too the same ones that super cheap sell but i didn't get them at super cheap prices
if i remember right they were
part # 81147 for your back shocks - i think they are out of a liteace
part # 81340 for your front shocks - i think they are lowered vn wagon rears
they fit straight on and they are about 3-4 inches longer extened than the shocks that came on mine (i think the shocks that came on mine might be longer than standard but i'm not sure)
|
|
|
|
 |
jamienoble
Joined: Mon Jul 28, 2008 11:30 pm Posts: 128 Location: perth
|
 Posted: Wed Sep 24, 2008 11:49 pm |
|
|
also how have you found the ride quality and handling etc??
|
|
|
|
 |
joeblow
Joined: Sat May 10, 2008 11:30 pm Posts: 3273 Location: melbourne
|
 Posted: Thu Sep 25, 2008 12:14 am |
|
hope people are extending bumpstops to suit....... 
_________________ builder of custom road legal zooks......and stuff.
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Thu Sep 25, 2008 12:25 am |
|
dont you know you have to extend your bumpstops till they are so long you actually get another 3 inches of lift
its what all the cool people do 
|
|
|
|
 |
Zook_Fan

az supporter
Joined: Thu Mar 13, 2008 10:30 pm Posts: 4530 Location: Toowoomba
Vehicle: Maruti and LJ80's
|
 Posted: Thu Sep 25, 2008 12:59 am |
|
|
that would make for one hell of a terrible ride
|
|
|
|
 |
Mike

lesspostingmorewheeling
Joined: Tue May 06, 2008 11:30 pm Posts: 2236 Location: Under Down Under
|
 Posted: Thu Sep 25, 2008 4:09 am |
|
Zook_Fan wrote: that would make for one hell of a terrible ride
but at least it would make you cool 
|
|
|
|
 |
Mike

lesspostingmorewheeling
Joined: Tue May 06, 2008 11:30 pm Posts: 2236 Location: Under Down Under
|
 Posted: Thu Sep 25, 2008 4:10 am |
|
jamienoble wrote: also how have you found the ride quality and handling etc??
they are a fair bit stiffer than the standard ones but so far they seem smoother
|
|
|
|
 |
hooki

az supporter
Joined: Mon Jul 21, 2008 11:30 pm Posts: 1785 Location: perth, WA
Vehicle: 85' LWB Sierra, 01' S15
|
 Posted: Fri Sep 26, 2008 7:05 am |
|
|
thanks for the help guys. this shock set up should be fine for running 2inch extended shakles and a 2inch spring lift??????
_________________ 79' LJ80 (sold) :( 95' & 97' sierra (sold)
|
|
|
|
 |
|