| auszookers.com https://auszookers.com/forum/ |
|
| Sierra carby vac lines https://auszookers.com/forum/viewtopic.php?f=5&t=30154 |
Page 1 of 1 |
| Author: | boostedbrick [ Fri Feb 03, 2012 9:08 am ] |
| Post subject: | Sierra carby vac lines |
I'm trying to sort out the vac lines on a stock 1.3 carb, I have most of it sorted from the FSM but I cant work out two lines. What does the secondary hook up to? If I stick it on any of the spare vacuum ports it just over fuels. And does it matter where the vac advance on the dizzy hooks up to? |
|
| Author: | steve125 [ Fri Feb 03, 2012 9:54 am ] |
| Post subject: | Re: Sierra carby vac lines |
there's some photos of where all the vac lines go on my 95's carby here viewtopic.php?f=1&t=25032&highlight=vacume |
|
| Author: | boostedbrick [ Fri Feb 03, 2012 12:05 pm ] |
| Post subject: | Re: Sierra carby vac lines |
steve125 wrote: there's some photos of where all the vac lines go on my 95's carby here viewtopic.php?f=1&t=25032&highlight=vacume Cheers dude, that sorts the vac advance out.. Just cant see what the secondary is going into. I have two available spots on the manifold down there, both are the same size externally. One has a very small opening. |
|
| Author: | boostedbrick [ Fri Feb 03, 2012 6:40 pm ] |
| Post subject: | Re: Sierra carby vac lines |
Anyone have an idea? Kinda hard to drive when it struggles past 3000rpm. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|