| auszookers.com https://auszookers.com/forum/ |
|
| Need help. https://auszookers.com/forum/viewtopic.php?f=5&t=30165 |
Page 1 of 1 |
| Author: | stompy812 [ Fri Feb 03, 2012 4:47 pm ] |
| Post subject: | Need help. |
Hey I got a Suzuki Jimny 2001 soft top and I was wondering if anyone can give me advice on how to get the axel shaft out ? Because at the moment the 4x4 only locks In at the transfer case and it spines both drive shafts but it doesn't spin both front and rear wheels it only spins the rear so I want to take the axel shafts out to take out the main ring pinion to see if there a broken set of teeth or if the axel shafts are snapped :D |
|
| Author: | christover1 [ Fri Feb 03, 2012 4:49 pm ] |
| Post subject: | Re: Need help. |
Check the free wheel hubs are not the problem. That is a more common problem. You'll need to wait for a more experienced Jimny owner on axle removal. Add Suzuki Jimny 2001 to thread title, it will help. |
|
| Author: | stompy812 [ Fri Feb 03, 2012 4:53 pm ] |
| Post subject: | Re: Need help. |
We removed the free wheeling hubs there was a lot of mud and grim inside cleaned it all out and re-greased it all but still same problem |
|
| Author: | atari4x4 [ Fri Feb 03, 2012 4:55 pm ] |
| Post subject: | Re: Need help. |
Jimny's run a vacuum operated Free Wheeling Hub, there is probably a split or a leak in the vacuum line. |
|
| Author: | christover1 [ Fri Feb 03, 2012 4:55 pm ] |
| Post subject: | Re: Need help. |
stompy812 wrote: We removed the free wheeling hubs there was a lot of mud and grim inside cleaned it all out and re-greased it all but still same problem Are they automatic free wheel hubs? Could be a vaacuum leak, or electric problem. Most people convert to manual hubs, for reliability. |
|
| Author: | stompy812 [ Fri Feb 03, 2012 4:56 pm ] |
| Post subject: | Re: Need help. |
They are automatic hubs |
|
| Author: | atari4x4 [ Fri Feb 03, 2012 4:59 pm ] |
| Post subject: | Re: Need help. |
yes they are "auto hubs" but they're vacuum operated |
|
| Author: | stompy812 [ Fri Feb 03, 2012 5:00 pm ] |
| Post subject: | Re: Need help. |
How do you check from the leak or split |
|
| Author: | stompy812 [ Fri Feb 03, 2012 5:59 pm ] |
| Post subject: | Re: Need help. |
Found it thanks |
|
| Author: | christover1 [ Fri Feb 03, 2012 6:02 pm ] |
| Post subject: | Re: Need help. |
stompy812 wrote: Found it thanks Excellent. Well done. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|