auszookers.com
https://auszookers.com/forum/

LWB SJ410 Diff Question
https://auszookers.com/forum/viewtopic.php?f=5&t=30342		 Page 1 of 1
Author:  jim_dover [ Fri Feb 10, 2012 1:56 pm ]
Post subject:  LWB SJ410 Diff Question
Hi everyone I recently purchased a 1LTR '84 LWB sierra. And I have decided to part out my SWB NT. I am wondering if the spartan locker that is currently fit in my SWB will be able to transfer into the rear of the LWB?
I was told that the LWB has been upgraded to 93? model LWB diffs as they have larger rear drums? Not sure if this will make a difference.

Any in put would be much appreciated!
Author:  Fatzook [ Fri Feb 10, 2012 2:23 pm ]
Post subject:  Re: LWB SJ410 Diff Question
Hard to say. 93 model LWB is most likely a NT Maruti, so the diffs will be smaller than your SWB diffs.

Can you get pics?
Author:  jim_dover [ Tue Feb 14, 2012 8:54 pm ]
Post subject:  Re: LWB SJ410 Diff Question
I can put some pics up. What do you want me to take photos of?
Author:  Fatzook [ Tue Feb 14, 2012 9:01 pm ]
Post subject:  Re: LWB SJ410 Diff Question
jim_dover wrote:
I can put some pics up. What do you want me to take photos of?


The whole car, and just the diff housings.
Author:  2stroker [ Wed Feb 15, 2012 7:14 am ]
Post subject:  Re: LWB SJ410 Diff Question
The way I understand this is that your original veh is a 1litre swb and you have bought a 1litre lwb fitted with 1993 diffs. If this is the case and it is still NT then it must have maruti diffs which are same size as 1300 NT except that they are 4.1 ratio. So your old centres will not fit they will be too small.
Author:  Fatzook [ Wed Feb 15, 2012 8:27 am ]
Post subject:  Re: LWB SJ410 Diff Question
2stroker wrote:
The way I understand this is that your original veh is a 1litre swb and you have bought a 1litre lwb fitted with 1993 diffs. If this is the case and it is still NT then it must have maruti diffs which are same size as 1300 NT except that they are 4.1 ratio. So your old centres will not fit they will be too small.


Sorry Kas but I have to disagree there mate. Maruti diffs post 94 ARE 1.3L size. All pre-94 are 1L size and ratio. He says the diffs are from a 93 LWB which ( unless they are from the uber-rare WT LWB) are 1L diffs.
Author:  jim_dover [ Wed Feb 15, 2012 5:11 pm ]
Post subject:  Re: LWB SJ410 Diff Question
Thanks for the in put guys. I have put photos up on the rigs of auszookers thread
viewtopic.php?f=4&t=30501

There is some photos there of both the car and the diffs hope this helps with my question?

cheers
Author:  Fatzook [ Wed Feb 15, 2012 7:55 pm ]
Post subject:  Re: LWB SJ410 Diff Question
Answer = No.

Your 86 NT Diff centres/ lockers are too big to fit into the 84 NT 1L housings.

BUT! You could straight swap the NT diffs into the 1L. Youll just need to sort out drive shafts and possibly rear brake line. ( can't remember) .
Author:  cairns27 [ Wed Feb 15, 2012 8:14 pm ]
Post subject:  Re: LWB SJ410 Diff Question
I've learnt the hard way,NT LWB centres won't fit into a NT SWB diff housing.

bye
Author:  want33s [ Wed Feb 15, 2012 8:25 pm ]
Post subject:  Re: LWB SJ410 Diff Question
cairns27 wrote:
I've learnt the hard way,NT LWB centres won't fit into a NT SWB diff housing.

bye


Really? :?

SWB and LWB 1.3 diffs are identical.....
1.0 diff housings and centres are different to 1.3 but again, swb and lwb 1.0's all share the same diff housings and centres.
Author:  cairns27 [ Wed Feb 15, 2012 8:40 pm ]
Post subject:  Re: LWB SJ410 Diff Question
want33 Ive got a 89 NT LWB 1.3.

I sold a wrecked NT SWB drover to Ben off this site, and he gave me a NT SWB housing he had ,spent a day cleaning and painting the dash thing;fitted it the next day..... centre wa too big.

bye
Author:  want33s [ Thu Feb 16, 2012 8:34 pm ]
Post subject:  Re: LWB SJ410 Diff Question
cairns27 wrote:
want33 Ive got a 89 NT LWB 1.3.

I sold a wrecked NT SWB drover to Ben off this site, and he gave me a NT SWB housing he had ,spent a day cleaning and painting the dash thing;fitted it the next day..... centre wa too big.

bye


Drovers are all 1.3.
If a 1.3 centre didn't fit the housing you got it's because it is a 1.0 housing.
Author:  cairns27 [ Thu Feb 16, 2012 8:57 pm ]
Post subject:  Re: LWB SJ410 Diff Question
Mine's stock, previously owned by a little old lady.

bye
Author:  want33s [ Fri Feb 17, 2012 7:07 am ]
Post subject:  Re: LWB SJ410 Diff Question
89 NT 1.3 LWB Really?
That'd be good except Suzuki stopped making them in 88.
Author:  BlueSuzy [ Fri Feb 17, 2012 7:50 am ]
Post subject:  Re: LWB SJ410 Diff Question
88 swb/lwb went WT. 1.3 diffs. NT flanges
Author:  cairns27 [ Fri Feb 17, 2012 5:17 pm ]
Post subject:  Re: LWB SJ410 Diff Question
Yea mine's a bit different, I think it's fully imported.

I seen others with my dodgy longrange tank setup, DOT didn,t know what 3rd party I had to have.

In the end we called it a soft top station wagon.

bye
Author:  want33s [ Fri Feb 17, 2012 7:55 pm ]
Post subject:  Re: LWB SJ410 Diff Question
cairns27 wrote:
Yea mine's a bit different, I think it's fully imported.

I seen others with my dodgy longrange tank setup, DOT didn,t know what 3rd party I had to have.

In the end we called it a soft top station wagon.

bye


Yellow LWB with a LR tank..... I bet yours is EX Qld railways.
Author:  303zuke [ Tue Feb 21, 2012 12:18 am ]
Post subject:  Re: LWB SJ410 Diff Question
cairns27 wrote:
Yea mine's a bit different, I think it's fully imported.

bye


Every single Suzuki product in Australia (Car, Bike 4wd, Outboard, Generator, Lawn Mower) IS FULLY IMPORTED! None of them are made in Australia
Author:  cairns27 [ Tue Feb 21, 2012 5:12 am ]
Post subject:  Re: LWB SJ410 Diff Question
Well if want33 is correct, QGR must have had a special lot imported.

bye
Author:  Fatzook [ Tue Feb 21, 2012 11:27 am ]
Post subject:  Re: LWB SJ410 Diff Question
cairns27 wrote:
Well if want33 is correct, QGR must have had a special lot imported.

bye



I don't believe so. They were all modified locally before delivery to QR.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/