| auszookers.com https://auszookers.com/forum/ |
|
| door panel https://auszookers.com/forum/viewtopic.php?f=5&t=3043 |
Page 1 of 1 |
| Author: | Mike [ Mon Sep 29, 2008 6:50 pm ] |
| Post subject: | door panel |
i'm trying to remove the door panel out of my sierra, i've removed the handle, door latch window winder an that strap thing bit i can't seem to get the panel off how can i get the panel off without damaging it? Cheers |
|
| Author: | kanejones [ Mon Sep 29, 2008 7:49 pm ] |
| Post subject: | Re: door panel |
Should just pop off? Its held by little press in clips, try getting the top, middle out first, and work to the edges. Flat head sxrew driver may help.. |
|
| Author: | Zook_Fan [ Mon Sep 29, 2008 7:54 pm ] |
| Post subject: | Re: door panel |
yeah i work from top back corner around. you have to be fairly forceful but not tair the studs out all the same |
|
| Author: | Damo [ Mon Sep 29, 2008 8:56 pm ] |
| Post subject: | Re: door panel |
See if you can located the studs and lever right next to them. |
|
| Author: | lump_a_charcoal [ Tue Sep 30, 2008 12:03 am ] |
| Post subject: | Re: door panel |
Yeah try and lever with something like a steel rule but stiffer... Maybe a stiff paint scraper... |
|
| Author: | jbonevia [ Tue Sep 30, 2008 1:39 am ] |
| Post subject: | Re: door panel |
yep, just took mine off the other day to install central locking, i used a steel ruler, just slid it in next to each tab and pulled it outwards, they just pop out. |
|
| Author: | jimbo_jones [ Tue Sep 30, 2008 1:45 am ] |
| Post subject: | Re: door panel |
you can buy a trim tool at super cheap that will slide around both side's of the clip |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|