auszookers.com
https://auszookers.com/forum/

Dimensions
https://auszookers.com/forum/viewtopic.php?f=5&t=30455		 Page 1 of 1
Author:  Zook_Fan [ Tue Feb 14, 2012 11:09 am ]
Post subject:  Dimensions
Just wondering if someone has a sierra near by that they could get a couple of quick measurements from. I need:
Diameter of front spring hanger (the piece of pipe the shackle bush goes into)
Width and height of the chassis rail
Height and depth of the sill

Any help would be greatly appreciated, need to order steel but can't get near my car.
Author:  zooky08 [ Tue Feb 14, 2012 11:23 am ]
Post subject:  Re: Dimensions
Having a guess here but the chassis should be 50x100mm rhs
Author:  wolf_rt [ Tue Feb 14, 2012 12:14 pm ]
Post subject:  Re: Dimensions
chassis is 50x100

this is the sill (im planning to replace the sills too :-)

You will notice a few inaccuracies... its hard to get this right with a tape the top two measurements should be 57 and 24 (not 51 & 21)

the total width is ~85mm and height ~170mm

Image

OD of the spring hanger is 39mm (cant help with the ID sorry) (Could have been 29 couldn't read the verniers properly)
Author:  Zook_Fan [ Tue Feb 14, 2012 2:35 pm ]
Post subject:  Re: Dimensions
Thanks a lot mate, much more detail than I thought I would get
Author:  wolf_rt [ Tue Feb 14, 2012 4:04 pm ]
Post subject:  Re: Dimensions
Like i said, im planning to put some RHS here myself, so i needed to figure it out anyway :-)

let us know what you end up getting and how it fits...
Author:  Zook_Fan [ Tue Feb 14, 2012 4:56 pm ]
Post subject:  Re: Dimensions
Will do but I'm not aiming for a stock look so it might not be what you're chasing
Author:  Red89 [ Tue Feb 14, 2012 8:28 pm ]
Post subject:  Re: Dimensions
Shackle end of the spring is 30mm diametre, I think the chassis mount for the shackle is the same size, chassis mount end of spring is 40mm.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/