| auszookers.com https://auszookers.com/forum/ |
|
| Quick vitara question https://auszookers.com/forum/viewtopic.php?f=5&t=30469 |
Page 1 of 1 |
| Author: | BRAD [ Tue Feb 14, 2012 6:58 pm ] |
| Post subject: | Quick vitara question |
hey all would i need to get extended brake lines if i have a 60mm lift? thanks |
|
| Author: | atari4x4 [ Tue Feb 14, 2012 7:08 pm ] |
| Post subject: | Re: Quick vitara question |
|
|
|
| Author: | BRAD [ Tue Feb 14, 2012 7:12 pm ] |
| Post subject: | Re: Quick vitara question |
F@*K thanks mate |
|
| Author: | atari4x4 [ Tue Feb 14, 2012 7:18 pm ] |
| Post subject: | Re: Quick vitara question |
you'll be alright if you don't flex it |
|
| Author: | BRAD [ Tue Feb 14, 2012 7:22 pm ] |
| Post subject: | Re: Quick vitara question |
HA! 
|
|
| Author: | DarkHorse [ Tue Feb 14, 2012 7:57 pm ] |
| Post subject: | Re: Quick vitara question |
They're not that expensive - I think I got my fronts replaced with longer braided lines for about $70... Pretty sure someone found some replacements off another car that screwed straight up, but could be wrong: viewtopic.php?f=4&t=25326&p=547680&hilit=longer+brake+lines#p547680 I was wrong, it's a Sierra. Might still work? |
|
| Author: | Joe [ Tue Feb 14, 2012 8:00 pm ] |
| Post subject: | Re: Quick vitara question |
Jimny brake lines slip straight onto a sierra and are longer but i don't know if they fit a vitara 
|
|
| Author: | got_bar_work [ Wed Feb 15, 2012 7:48 am ] |
| Post subject: | Re: Quick vitara question |
Rear is the problem and the breather Just take them in to a brake shop and ask for these but what ever u need longer it's only like 50-60 each If u don't have to much travel in the front I've seen people take them out Of the bracket on the strut and just cable tie it to the strut body for that bit more length |
|
| Author: | BRAD [ Wed Feb 15, 2012 7:57 pm ] |
| Post subject: | Re: Quick vitara question |
Thanks guys |
|
| Author: | DarkHorse [ Wed Feb 15, 2012 8:16 pm ] |
| Post subject: | Re: Quick vitara question |
When I first lifted my Vit I unscrewed the brake line from the last fixing point on the chassis crossmember and left it floating - worked fine at full droop. Same up front - unbolt the next point up from the strut bracket. Breathers are a pain, gotta get around to that... |
|
| Author: | BRAD [ Wed Feb 15, 2012 8:32 pm ] |
| Post subject: | Re: Quick vitara question |
might do that yeah breather is a pain in the rear it looks like it sits about the same height at the rear bumper but it is wedged in there |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|