auszookers.com
https://auszookers.com/forum/

G16B revs/idles hard when engaging clutch?
https://auszookers.com/forum/viewtopic.php?f=5&t=30481		 Page 1 of 1
Author:  shane1992 [ Wed Feb 15, 2012 9:19 am ]
Post subject:  G16B revs/idles hard when engaging clutch?
Hey guys,

My G16B is idling like a spastic, everytime I put the clutch in to chage gears it will rev up to 3500rpm.. Its like it is still accelerating...
Even on idle it has started to idle up and down from 2000-3000 and I can take off with out using the accelerator and it will want to keep driving..

Sometimes it idles as normal... so its not always constantly doing it... But it idles like a spastic more then it idles normal!

Cheers
Shane
Author:  christover1 [ Wed Feb 15, 2012 12:23 pm ]
Post subject:  Re: G16B revs/idles hard when engaging clutch?
Could clutch pedal or cable be dragging on the accelerator cable?

Does it idle slow in neutral, and rev high when foot goes on clutch?
Author:  shane1992 [ Wed Feb 15, 2012 6:22 pm ]
Post subject:  Re: G16B revs/idles hard when engaging clutch?
christover1 wrote:
Could clutch pedal or cable be dragging on the accelerator cable?

Does it idle slow in neutral, and rev high when foot goes on clutch?



I dont think that the cable is dragging on each other..

And it still idles fast when in neutral,

The times it idles normal is when its at running temperature,,, but mostly still idling heaps fast

Its so annoying when I stop at traffic lights and my car is idleing at 2500-3000 rpm,,, especially with a straight through 2 inch exhaust!
Author:  christover1 [ Wed Feb 15, 2012 6:44 pm ]
Post subject:  Re: G16B revs/idles hard when engaging clutch?
Air pockets in cooling system can play tricks on the ecu.
Is temperature stable or erratic?

May be wise to keep an eye on coolant level.
Author:  royce [ Wed Feb 15, 2012 7:28 pm ]
Post subject:  Re: G16B revs/idles hard when engaging clutch?
clean your AFM and check for vacuum leaks
Author:  JrZook [ Wed Feb 15, 2012 9:34 pm ]
Post subject:  Re: G16B revs/idles hard when engaging clutch?
royce wrote:
clean your AFM and check for vacuum leaks


How do you clean out the cone style AFM boss....?
Author:  shane1992 [ Thu Feb 16, 2012 7:58 am ]
Post subject:  Re: G16B revs/idles hard when engaging clutch?
Temperature stays the same all the time 1/4 on the gauge..
I will check the coolant level.. is best way to let the car run to operating temp with the radiator cap off to release air pockets?

Yeah ill clean the AFM too
Author:  christover1 [ Thu Feb 16, 2012 9:38 am ]
Post subject:  Re: G16B revs/idles hard when engaging clutch?
shane1992 wrote:
is best way to let the car run to operating temp with the radiator cap off to release air pockets?


That works for me usually.
I squeeze the rad hose a bit, helps get air out.
Have heater on, too, so water/coolant is flowing thru whole system.
Author:  atari4x4 [ Thu Feb 16, 2012 9:43 am ]
Post subject:  Re: G16B revs/idles hard when engaging clutch?
parking the car with the front up hill will also help
Author:  royce [ Thu Feb 16, 2012 12:43 pm ]
Post subject:  Re: G16B revs/idles hard when engaging clutch?
JrZook wrote:
royce wrote:
clean your AFM and check for vacuum leaks


How do you clean out the cone style AFM boss....?


Dishawasher? arent all those old engines dead and buried now :)
Author:  JrZook [ Thu Feb 16, 2012 1:41 pm ]
Post subject:  Re: G16B revs/idles hard when engaging clutch?
royce wrote:
JrZook wrote:
royce wrote:
clean your AFM and check for vacuum leaks


How do you clean out the cone style AFM boss....?


Dishawasher? arent all those old engines dead and buried now :)


LOL!

I have one and I believe the OP has one on his build. Dishwasher it is :P
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/