Intake
cold.............0.005 to 0.007inch (0.13 to 0.17mm)
Hot..............0.009 to 0.011inch (0.23 to 0.27mm)
Exhaust
cold.............0.006 to 0.008inch (0.16 to 0.20mm)
Hot..............0.010 to 0.012inch (0.26 to 0.30mm)
Care of Mr.Haynes....
| auszookers.com https://auszookers.com/forum/ |
|
| Tapper clearance (valve clearance ) https://auszookers.com/forum/viewtopic.php?f=5&t=3049 |
Page 1 of 1 |
| Author: | Marksy_06 [ Tue Sep 30, 2008 9:39 pm ] |
| Post subject: | Tapper clearance (valve clearance ) |
does anyone know the tapper clearance for 1.3 ? |
|
| Author: | Mike [ Tue Sep 30, 2008 11:10 pm ] |
| Post subject: | Re: Tapper clearance (valve clearance ) |
it should say the "hot" clearances under the bonnet |
|
| Author: | Cozook [ Tue Sep 30, 2008 11:18 pm ] |
| Post subject: | Re: Tapper clearance (valve clearance ) |
Intake cold.............0.005 to 0.007inch (0.13 to 0.17mm) Hot..............0.009 to 0.011inch (0.23 to 0.27mm) Exhaust cold.............0.006 to 0.008inch (0.16 to 0.20mm) Hot..............0.010 to 0.012inch (0.26 to 0.30mm) Care of Mr.Haynes....
|
|
| Author: | Marksy_06 [ Tue Sep 30, 2008 11:36 pm ] |
| Post subject: | Re: Tapper clearance (valve clearance ) |
Thanks alot for that guys! that a big help |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|