| auszookers.com https://auszookers.com/forum/ |
|
| ruf shakes https://auszookers.com/forum/viewtopic.php?f=5&t=30504 |
Page 1 of 1 |
| Author: | ashzook94 [ Wed Feb 15, 2012 6:28 pm ] |
| Post subject: | ruf shakes |
just done a ruf on mine and went for a drive a went around a corners and the whole diff shook from side to side it was fine after i straighthen up again and slowed down but has anyone else had the same problem |
|
| Author: | Gwagensteve [ Wed Feb 15, 2012 6:43 pm ] |
| Post subject: | Re: ruf shakes |
Search "Death Wobble" You've changed the caster and softened spring rate. You've also changed the drag link angle and are likely running longer/flatter shackles. You'll just have to work though the variables. |
|
| Author: | ashzook94 [ Wed Feb 15, 2012 6:48 pm ] |
| Post subject: | Re: ruf shakes |
im running tsor shackles and ome leaves and 4 inch jeep shocks... |
|
| Author: | 31zook [ Wed Feb 15, 2012 9:05 pm ] |
| Post subject: | Re: ruf shakes |
Have a look at what steve suggested. The way with cars are they cut there own little rut in things, then when you replace one thing it upsets the rest and has a chain reaction. Like the old 1mod equals 3mods. More then likely, king pin's, worn bushes, slop in ball joints, slop in the steering box and wheel bearings will contribute. |
|
| Author: | atari4x4 [ Wed Feb 15, 2012 9:17 pm ] |
| Post subject: | Re: ruf shakes |
i searched ruff shakes & got this memberlist.php?mode=viewprofile&u=1784 |
|
| Author: | shakes [ Thu Feb 16, 2012 5:47 pm ] |
| Post subject: | Re: ruf shakes |
atari4x4 wrote: i searched ruff shakes & got this http://auszookers.com/forum/memberlist. ... ile&u=1784 Ruff is one of the nicer words thats been used to describe me New stats in the forum are scary, shows how much I actually contribute and how much shit I talk. Listen to the first two posts, they have the answers! |
|
| Author: | SierraDan [ Thu Feb 16, 2012 6:38 pm ] |
| Post subject: | Re: ruf shakes |
I have zero shakes B) |
|
| Author: | ashzook94 [ Thu Feb 16, 2012 8:23 pm ] |
| Post subject: | Re: ruf shakes |
turns out wheels were out of balance a little and u bolts were firm/tight, but not tight/ tight |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|