I have a sierra tcase without a detent ball, and I went through the FSM and couldn't find a size, if someone could help me out it would be much appreciated.
Cheers
| auszookers.com https://auszookers.com/forum/ |
|
| What size is the detent ball? https://auszookers.com/forum/viewtopic.php?f=5&t=30508 |
Page 1 of 1 |
| Author: | 31zook [ Wed Feb 15, 2012 8:48 pm ] |
| Post subject: | What size is the detent ball? |
I have a sierra tcase without a detent ball, and I went through the FSM and couldn't find a size, if someone could help me out it would be much appreciated. Cheers
|
|
| Author: | scorpydude [ Thu Feb 16, 2012 7:52 am ] |
| Post subject: | Re: What size is the denten ball? |
There are two different size balls in the Sierra tcase. A large one is used for the 4wd light switch. Three smaller ones are used for the selector levers. I can get you exact measurements when i'm home tonight - which ball are you reffering to? |
|
| Author: | SierraDan [ Thu Feb 16, 2012 10:55 am ] |
| Post subject: | Re: What size is the denten ball? |
I MAY have a set of ball from the kit I got my shifter bush. I'll check. |
|
| Author: | mrw82 [ Thu Feb 16, 2012 11:20 am ] |
| Post subject: | Re: What size is the denten ball? |
At a guess I'd say its 6mm. But its only a guess. |
|
| Author: | scorpydude [ Thu Feb 16, 2012 4:57 pm ] |
| Post subject: | Re: What size is the denten ball? |
Pretty close Mark! Digital callipers say... Large = 9.5mm Small = 7.8mm Prob about .2-.5-+ mm variation |
|
| Author: | 31zook [ Thu Feb 16, 2012 5:45 pm ] |
| Post subject: | Re: What size is the denten ball? |
 thanks scorpydude. and ill just go to a bearing shop and buy a bearing dan, thanks all the same
|
|
| Author: | Brenno [ Mon Apr 02, 2012 8:25 am ] |
| Post subject: | Re: What size is the denten ball? |
Is this ball called the Detent ball or Denten ball...Just for future reference as I had quite a bit of trouble finding this thread. |
|
| Author: | SierraDan [ Mon Apr 02, 2012 9:38 am ] |
| Post subject: | Re: What size is the denten ball? |
Detent. |
|
| Author: | Brenno [ Mon Apr 02, 2012 4:06 pm ] |
| Post subject: | Re: What size is the denten ball? |
I got a 5/16th today as they didnt have any 8mm balls. Thanks dan |
|
| Author: | Scrawny [ Mon Apr 02, 2012 5:15 pm ] |
| Post subject: | Re: What size is the denten ball? |
Brenno wrote: Is this ball called the Detent ball or Denten ball...Just for future reference as I had quite a bit of trouble finding this thread. Edited for future reference |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|