X2.. just squeezed the bolt out by using a big G clamp.. and making it as tigh as we could
| auszookers.com https://auszookers.com/forum/ |
|
| Spring bush help... https://auszookers.com/forum/viewtopic.php?f=5&t=30533 |
Page 1 of 1 |
| Author: | worldo [ Thu Feb 16, 2012 8:22 pm ] |
| Post subject: | Spring bush help... |
Have changed all bushes but passenger front rear bush. We cannot get the bolt out no matter what we try. Need some more ideas please. P.s I did search and found sheps dodgy bush replacement techniques haha |
|
| Author: | SierraDan [ Thu Feb 16, 2012 8:36 pm ] |
| Post subject: | Re: Spring bush help... |
This exact thing happened to me. I cut it off and put a new bolt through. |
|
| Author: | ZookFan [ Thu Feb 16, 2012 8:46 pm ] |
| Post subject: | Re: Spring bush help... |
X2.. just squeezed the bolt out by using a big G clamp.. and making it as tigh as we could
|
|
| Author: | worldo [ Thu Feb 16, 2012 9:28 pm ] |
| Post subject: | Re: Spring bush help... |
Gunna try the g clamp in morning sounds like the go. Other wise the old 4inch will come out. Cheers lads |
|
| Author: | cairns27 [ Thu Feb 16, 2012 9:43 pm ] |
| Post subject: | Re: Spring bush help... |
Five inch with a knife blade, jack under spring. Welders gauntlets and face shield, all over in minutes. bye |
|
| Author: | zooky08 [ Thu Feb 16, 2012 9:59 pm ] |
| Post subject: | Re: Spring bush help... |
Some times the bolt gets rusted to the steel tube and since the tube is larger diameter it won't come out through the hole |
|
| Author: | sideways [ Thu Feb 16, 2012 11:48 pm ] |
| Post subject: | Re: Spring bush help... |
I tried a gear puller but it just bent the hanger.  I had to cut 3 of mine with a hack saw...... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|