Look inside the bottom of the handle...theres a little screw in there
| auszookers.com https://auszookers.com/forum/ |
|
| Removing GV drivers door interior trim https://auszookers.com/forum/viewtopic.php?f=5&t=30627 |
Page 1 of 1 |
| Author: | TheOtherLeft [ Mon Feb 20, 2012 2:14 pm ] |
| Post subject: | Removing GV drivers door interior trim |
Hiya all, How do you remove the interior drivers door trim on the GV? I've done it once before several years ago to install better speakers but I can't seem to get it off now. I can unclip it all including the window control switch but it gets caught at the inner door handle. The FSM says to rotate the door trim to untangle it from the handle but I can't even get it loose enough to rotate it. There seem to be only 2 screws and the clips around the perimeter. Am I missing something near the door handle? Thanks, |
|
| Author: | shabz [ Mon Feb 20, 2012 5:57 pm ] |
| Post subject: | Re: Removing GV drivers door interior trim |
Look inside the bottom of the handle...theres a little screw in there
|
|
| Author: | TheOtherLeft [ Mon Feb 20, 2012 6:43 pm ] |
| Post subject: | Re: Removing GV drivers door interior trim |
shabz wrote: Look inside the bottom of the handle...theres a little screw in there Is there? I thought it was a pin for the handle. Thanks for that, I'll have a closer look. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|