| auszookers.com https://auszookers.com/forum/ |
|
| source for inner tubes? https://auszookers.com/forum/viewtopic.php?f=5&t=31236 |
Page 1 of 1 |
| Author: | tanshi [ Sat Mar 17, 2012 5:53 pm ] |
| Post subject: | source for inner tubes? |
Can any one tell me where i might be able to get a 215/225/235 60/65 14 inch tire tube in brisbane. It needs to be one that has a nut on the valve steam to seal up air tight on the rim. this is the size that my internal stauns use. I can buy from poly performance in the US but they want nearly $60 for the tube and another $70 for shipping to AUS. |
|
| Author: | OFFROAD_SOLUTIONS [ Sat Mar 17, 2012 6:09 pm ] |
| Post subject: | Re: replacment parts for internal beadlocks |
Harley tubes work. Or second air in Melbourne I think but they don't do air channels |
|
| Author: | tanshi [ Wed Mar 28, 2012 9:14 am ] |
| Post subject: | Re: source for inner tubes? |
Bump and rewrite |
|
| Author: | want33s [ Wed Mar 28, 2012 9:17 am ] |
| Post subject: | Re: source for inner tubes? |
As above I've used Harley tubes before. Air passages are easy to make if you can get hold of vinyl coated material and a decent sewing machine. |
|
| Author: | tanshi [ Wed Mar 28, 2012 9:28 am ] |
| Post subject: | Re: source for inner tubes? |
any particular harley model i need to ask for? or source? |
|
| Author: | want33s [ Wed Mar 28, 2012 3:08 pm ] |
| Post subject: | Re: source for inner tubes? |
tanshi wrote: any particular harley model i need to ask for? or source? One with a 14" wheel. A 15" tube will work just as well. Just ask for a tube. They might have to get them in. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|