Ah ok, the paint was all flash in that pic. I thought that must have been taken after the recent build. Yeah it definitely copped a flogging down at rover
| auszookers.com https://auszookers.com/forum/ |
|
| Sliders https://auszookers.com/forum/viewtopic.php?f=5&t=3165 |
Page 1 of 1 |
| Author: | Damo [ Wed Oct 15, 2008 12:18 pm ] |
| Post subject: | Sliders |
Someone mentioned Shrockworks sliders, so I had a bit of a gander here[ They look nice, but I noticed that they are boltd to the body AND to the chassis. Now granted the body doesn't really move around on the chassis that much, but my train of thought leads me to either bolting them to the body OR the chassis, not both. Thoughts? |
|
| Author: | joeblow [ Wed Oct 15, 2008 1:02 pm ] |
| Post subject: | Re: Sliders |
i've seen them also. could be ok but could also lead to fatigue cracks in the body, and we all know what sooks are like standard with cracking. much rather go just off the chassis. |
|
| Author: | Damo [ Wed Oct 15, 2008 1:11 pm ] |
| Post subject: | Re: Sliders |
joeblow wrote: i've seen them also. could be ok but could also lead to fatigue cracks in the body, and we all know what sooks are like standard with cracking. much rather go just off the chassis.
What about bolting them to the body? Or welding it even. |
|
| Author: | Dee [ Wed Oct 15, 2008 2:10 pm ] |
| Post subject: | Re: Sliders |
Damo wrote: Someone mentioned Shrockworks sliders, so I had a bit of a gander here[
They look nice, but I noticed that they are boltd to the body AND to the chassis. Now granted the body doesn't really move around on the chassis that much, but my train of thought leads me to either bolting them to the body OR the chassis, not both. Thoughts? hehe, im in the exact same boat. I like that style but am having issues with mounting... |
|
| Author: | steve [ Wed Oct 15, 2008 2:41 pm ] |
| Post subject: | Re: Sliders |
cut the sills out and put some box there. Makes it look pretty stock and you don't lose clearence. I have done that with mine and they cop a flogging and never any damage. |
|
| Author: | basketcase [ Wed Oct 15, 2008 3:10 pm ] |
| Post subject: | Re: Sliders |
Bolting or even welding sliders to the body would be a waste of time. I would have gone the same way as steve if my sills were rusted any more. The sliders I am getting made up are tube with a U shaped flat plate mount at the back around the chassis and plate front mount on the body mount. |
|
| Author: | Damo [ Wed Oct 15, 2008 3:24 pm ] |
| Post subject: | Re: Sliders |
steve wrote: cut the sills out and put some box there. Makes it look pretty stock and you don't lose clearence. I have done that with mine and they cop a flogging and never any damage.
That'd save me fixing the rust on the driver's side sill. What size box did you use Steve? |
|
| Author: | steve [ Wed Oct 15, 2008 4:06 pm ] |
| Post subject: | Re: Sliders |
can'tmember... i'll post some pics tonight. |
|
| Author: | lump_a_charcoal [ Wed Oct 15, 2008 6:42 pm ] |
| Post subject: | Re: Sliders |
Reckon if you welded a tube step off the side it would add too much leverage if it got hung up on a rock or something? |
|
| Author: | steve [ Wed Oct 15, 2008 7:30 pm ] |
| Post subject: | Re: Sliders |
pics.. box is 50mm x 70mm |
|
| Author: | Hybrid [ Wed Oct 15, 2008 7:59 pm ] |
| Post subject: | Re: Sliders |
Don't suppose you've tested these yet Steve? I was thinking of doing the same thing (though not angled) but thought that the sheet steel where it was welded would fold when hit. |
|
| Author: | steve [ Wed Oct 15, 2008 8:04 pm ] |
| Post subject: | Re: Sliders |
yeah they've had plenty of use. You saw the stuff we were doing at Rover Park, and have done lots of bashing and scrapping over rocks. I welded the top side all the way along, and the bottom side is braced on to the underbody cross supports. It's pretty solid. |
|
| Author: | Hybrid [ Wed Oct 15, 2008 8:28 pm ] |
| Post subject: | Re: Sliders |
Ah ok, the paint was all flash in that pic. I thought that must have been taken after the recent build. Yeah it definitely copped a flogging down at rover
|
|
| Author: | Damo [ Wed Oct 15, 2008 8:41 pm ] |
| Post subject: | Re: Sliders |
Hey Steve, have you got any pics of how you cleaned it up around the footwell? In that first pic there is a big gap there, is the footwell left exposed? |
|
| Author: | steve [ Wed Oct 15, 2008 9:11 pm ] |
| Post subject: | Re: Sliders |
Hybrid, i did this when i was putting the car together, two years ago. Damo, yeah i cut a fair bit out.... wasn't really necessary though, i got a bit carried away. You don't need to cut the floor out. I though it'd create more clearence but once the box is there it didn't make a difference. I just put some 1.8 body panel sheet there to fill the space in. |
|
| Author: | basketcase [ Thu Oct 16, 2008 1:05 am ] |
| Post subject: | Re: Sliders |
I was thinking of something more like this but with RHS if the sills were cut away. |
|
| Author: | RIKSTR [ Tue Sep 07, 2010 3:40 am ] |
| Post subject: | Re: Sliders |
anoyone else got pics of this, just getting some ideas |
|
| Author: | chris_mac [ Tue Sep 07, 2010 6:31 am ] |
| Post subject: | Re: Sliders |
i have done those sliders, they look similar like Shrockworks sliders, but are mounted only to the body. i don't have high lift jack but if i had I wouldn't hesitate to use sliders as a lift surface. design could be beefed up by welding a piece to both ends of the sliders and another piece bolted to spring mounts on the chassis and connect them together with the bolt and rubber bush, like body mounts so it could flex, but also be strong. here's the link: http://www.auszookers.com/index.php?nam ... 132#238132 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|