auszookers.com
https://auszookers.com/forum/

wt diffs on a nt
https://auszookers.com/forum/viewtopic.php?f=5&t=3175
Page 1 of 1

Author:  dockers [ Thu Oct 16, 2008 5:46 pm ]
Post subject:  wt diffs on a nt

whos done this? was it hard? was it worth it?

Author:  steve [ Thu Oct 16, 2008 6:02 pm ]
Post subject:  Re: wt diffs on a nt

lots of people do it.

easy if you're in to that kind of stuff.

worth it? I don't think i'd bother, if someone gave you the WT diffs already converted it might be ok, but for the extra width... i don't think it makes that much difference to anything, maybe just a cool factor?

Author:  rustylj [ Fri Oct 17, 2008 3:07 am ]
Post subject:  Re: wt diffs on a nt

thats bullshit. they make a sierra flex much better in the bush

Author:  steve [ Fri Oct 17, 2008 10:22 am ]
Post subject:  Re: wt diffs on a nt

How much work did you put in to yours and how much improvement did you get? Post up some measurements and photos.

Author:  zookernator [ Fri Oct 17, 2008 10:15 pm ]
Post subject:  Re: wt diffs on a nt

go out all, get hilux diffs!!!!!!!!!!!!!! Plenty of benefits!! Not a good pic, but their the same tire (32X10.5), but different rims (obviously).
I realise there would be heaps more work involved, but you get heaps better results! Inc Flex :wink:
This is zook front, lux rear
Image
Image

Author:  steve [ Fri Oct 17, 2008 10:16 pm ]
Post subject:  Re: wt diffs on a nt

i tend to agree zookinatorious. That's what my original point was, i know people thinks that's "bullshit", but the question is, if it's actually worth it... and i don't think it is. It'd be about as usefull as extractors or twinsticks (heh here we go). sure you might get some gain, but are we talking about 5%? why bother? If you're going to swap diffs why not put bigger diffs under there while you're at it, to increase strength aswell. toyota, nissan, which ever. get some diffs with the same offsets as sierras. I'd probably go spring under with some lift, so it all would look pretty stock standard.

PS. Nothing wrong with a NT sierra, it'll go as far up a track as a NT with WT diffs. You can always get width with bigger offset rims if you want an easy option.

Author:  zookernator [ Fri Oct 17, 2008 10:26 pm ]
Post subject:  Re: wt diffs on a nt

Image

Image

Author:  Zook_Fan [ Fri Oct 17, 2008 10:49 pm ]
Post subject:  Re: wt diffs on a nt

you got any pics of the inboarded shocky set up u run?

Author:  zookernator [ Fri Oct 17, 2008 10:58 pm ]
Post subject:  Re: wt diffs on a nt

Replaced the original bar thingy with a bit of 50X50 RHS, with 2 bolts welded through it!! Their 8" apart. And yup, i know that bush looks yucky, all fixed up now though!! haha

Image

Author:  Zook_Fan [ Fri Oct 17, 2008 11:07 pm ]
Post subject:  Re: wt diffs on a nt

so you welded onto chassis? or cut of the old and welded onto what was left?

Author:  steve [ Fri Oct 17, 2008 11:30 pm ]
Post subject:  Re: wt diffs on a nt

that's not the standard cross member of a chassis anyways.

Author:  zookernator [ Sat Oct 18, 2008 1:57 am ]
Post subject:  Re: wt diffs on a nt

Zook_Fan wrote:
so you welded onto chassis? or cut of the old and welded onto what was left?

Left thye original mounting brackets (as seen in the pic), welded back onto them.. and a small weld onto the chassis, where the original one was. Pretty much re-welded where the original weld was..

Author:  dockers [ Sun Oct 19, 2008 9:38 pm ]
Post subject:  Re: wt diffs on a nt

whats the difference in width between wt and nt.

Author:  Taff [ Mon Oct 20, 2008 12:37 am ]
Post subject:  Re: wt diffs on a nt

around 80mm.

didnt you get defected for your lux diffs zookenator?

Author:  zookernator [ Mon Oct 20, 2008 10:45 pm ]
Post subject:  Re: wt diffs on a nt

Well, not really for the diffs themself no. Got done for being to high and to wide compared to a stock zook. This is only cause we cant get things engineered down here :(

Author:  Taff [ Tue Oct 21, 2008 2:28 am ]
Post subject:  Re: wt diffs on a nt

not much better in QLD.

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/