| auszookers.com https://auszookers.com/forum/ |
|
| sierra front brake caliper rebuild https://auszookers.com/forum/viewtopic.php?f=5&t=31789 |
Page 1 of 1 |
| Author: | CompTruck [ Thu Apr 12, 2012 3:04 pm ] |
| Post subject: | sierra front brake caliper rebuild |
hi mates. just after quick info on how to rebuild front caliper. i watched a couple on youtube but they didnt have the metal clip sorta thing that holds it in so im not sure how to do it. |
|
| Author: | zukmeista [ Thu Apr 12, 2012 3:36 pm ] |
| Post subject: | Re: sierra front brake caliper rebuild |
I have tried it, not an easy job if you haven't done it before. I would suggest asking someone who has done it before to help you. |
|
| Author: | Brenno [ Thu Apr 12, 2012 3:58 pm ] |
| Post subject: | Re: sierra front brake caliper rebuild |
On a note that may help the original poster - where can one find the clips that hold the brake pads in. I have lost a few over the years and it seems to cause some unwanted departure of brake pads.... |
|
| Author: | CompTruck [ Thu Apr 12, 2012 5:12 pm ] |
| Post subject: | Re: sierra front brake caliper rebuild |
im thinkn the metal ring/clip sorta thing may have been inside the rubber seal. will check. if so it looks like a easy job. just the youtube ones didnt have this extra bit but it mught have come out of the seal |
|
| Author: | zukmeista [ Fri Apr 13, 2012 4:10 am ] |
| Post subject: | Re: sierra front brake caliper rebuild |
It may look easy, but it isn't. |
|
| Author: | Red89 [ Fri Apr 13, 2012 5:54 am ] |
| Post subject: | Re: sierra front brake caliper rebuild |
I know the lux ones are fairly easy, what makes the zook ones so hard ? |
|
| Author: | Jazzor [ Sat Apr 14, 2012 1:49 am ] |
| Post subject: | Re: sierra front brake caliper rebuild |
Here you go Brenno: http://www.ebay.com.au/itm/Disc-Pad-Ant ... 1161wt_989 It took me a while to track down, but I bought some a while ago. |
|
| Author: | CompTruck [ Sat Apr 14, 2012 3:45 pm ] |
| Post subject: | Re: sierra front brake caliper rebuild |
good work on the holder clips link. put all mine bak on to descover im missing one side of the clips. will need to purchase some of them ones |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|