| auszookers.com https://auszookers.com/forum/ |
|
| transfer case rebuild question https://auszookers.com/forum/viewtopic.php?f=5&t=31828 |
Page 1 of 1 |
| Author: | ROAR99 [ Sat Apr 14, 2012 4:19 pm ] |
| Post subject: | transfer case rebuild question |
speedo drive is stuck in ,,rusty tried soaking it in wd40 and still wont budge. case is striped down but cant get main drive gears out to replace bearings.. speedo drive runs of that shaft so i guess thats what is stoping the main shaft from sliding out.. any ideas how to get it out??? |
|
| Author: | want33s [ Sat Apr 14, 2012 4:53 pm ] |
| Post subject: | Re: transfer case rebuild question |
I usually lock a pair of Vise grips onto the top edge and stick a screwdriver between the jaws to wiggle the drive. Once it wiggles it will pop out pretty easily. |
|
| Author: | Daves4wd [ Sat Apr 14, 2012 6:12 pm ] |
| Post subject: | Re: transfer case rebuild question |
Try turn the drive holder thingo then it should come right out or if it's striped down can you get a center punch on it and give few light taps?? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|