auszookers.com
https://auszookers.com/forum/

Where do these hoses go? G16B Baleno
https://auszookers.com/forum/viewtopic.php?f=5&t=31846		 Page 1 of 1
Author:  boostedbrick [ Sun Apr 15, 2012 6:01 pm ]
Post subject:  Where do these hoses go? G16B Baleno
Can anyone tell me where these go? AFAIK one is for carbon canister but cant see what else needs hooking up... Had a look at the FSM but the pictures aren't clear enough, its a dizzy baleno motor.




Image
Author:  Gwagensteve [ Sun Apr 15, 2012 6:08 pm ]
Post subject:  Re: Where do these go? G16B
The little red cap on the manifold runs to the MAP sensor which is in your hand.

The solenoid with the red plug on it runs to the "purge" barb on your carbon canister.

I can't help with the barb on the rocker cover breather.

Steve.
Author:  boostedbrick [ Mon Apr 16, 2012 8:21 am ]
Post subject:  Re: Where do these go? G16B
Cool, thanks Steve.
Author:  Teracis [ Tue Apr 17, 2012 6:13 am ]
Post subject:  Re: Where do these go? G16B
I have an untouched coilpack baleno downstairs I can go take a photo of later if you would like?

I don't know how close they will be but it's stock and still in the car.
Author:  BlueSuzy [ Tue Apr 17, 2012 12:42 pm ]
Post subject:  Re: Where do these hoses go? G16B Baleno
Coilpacks are different.

I have 2 motors downstairs. :lol:
Author:  tanshi [ Tue Apr 17, 2012 1:08 pm ]
Post subject:  Re: Where do these hoses go? G16B Baleno
coil pack one doesnt have the one between the manifold and the rockercover so i cant help either :(
Author:  boostedbrick [ Tue Apr 17, 2012 7:52 pm ]
Post subject:  Re: Where do these hoses go? G16B Baleno
I think ill just block it off for now. Hope to get it started this weekend so ill see if it causes any issues.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/