auszookers.com
https://auszookers.com/forum/

Scintex Jimny snorkel from Ebay.
https://auszookers.com/forum/viewtopic.php?f=5&t=31933		 Page 1 of 1
Author:  ak47 [ Thu Apr 19, 2012 8:13 am ]
Post subject:  Scintex Jimny snorkel from Ebay.
Hey All.

I am looking at getting a snorkel for my jimny, just wondering if anyone has any experience with Scintex????
They seem to have a pretty good write up and warranty, and look very similar to the TJM ones, however, for much less $$.

http://www.ebay.com.au/itm/Snorkel-Kit- ... 939wt_1185


Apologies if this qn has been asked before, I did do a search first, though couldn't find anything on it...

thanks for your time.

AK
Author:  Fatzook [ Thu Apr 19, 2012 8:28 am ]
Post subject:  Re: Scintex snorkel from ebay
Well is plastic, NOT fibreglass, so it sounds like a winner to me!
Author:  squibby [ Thu Apr 19, 2012 10:51 am ]
Post subject:  Re: Scintex Jimny snorkel from Ebay.
Looks like a good one if it has all the features advertised, example, "flexible conecting"

I've only fitted a couple of snorkels so far, both big plastic chunky clones of this design. The hard bit is usually getting the pipe from the snorkel to the Airbox to line up. You just guess basically since there are a few variables, you can't measure. So the flexible connector is a good idea. buy it. Or get the Fibre glass one. Some people have a problem with fibre glass, but lets not forget, it was the 'carbon fibre' of the 60's. Lightweight and Hard. It's only out of fashion because it's been surplanted by Kevlar and Carbon fibre.
Author:  Fatzook [ Thu Apr 19, 2012 11:08 am ]
Post subject:  Re: Scintex Jimny snorkel from Ebay.
squibby wrote:
It's only out of fashion because it's been surplanted by Kevlar and Carbon fibre.


Tangent:

I'd take a moulded urethane ( plastic) product over fibreglass any day. Fibreglass HATES impact. Plastic is alot more tolerant, and this makes it a better candidate for a snorkle IMO, as the chances of a tree/ branch strike are quite high.
Author:  ZookFan [ Thu Apr 19, 2012 11:15 am ]
Post subject:  Re: Scintex Jimny snorkel from Ebay.
Good point pete..
Author:  BertZook [ Thu Apr 19, 2012 11:23 am ]
Post subject:  Re: Scintex Jimny snorkel from Ebay.
is this the same snorkel ebay kit thats been around for a bit now??... the one that says "jimny" on the snorkell

if so I know there are few ppl on here that had bought it.... just dnt remember atm who.. go trough the rigs section
Author:  Scales [ Thu Apr 19, 2012 11:39 am ]
Post subject:  Re: Scintex Jimny snorkel from Ebay.
went wheeling with a bloke on here in townsville and he just got one, not as good as my airtek, but still pretty damn good!
Author:  squibby [ Thu Apr 19, 2012 11:56 am ]
Post subject:  Re: Scintex Jimny snorkel from Ebay.
BertZook wrote:
is this the same snorkel ebay kit thats been around for a bit now??... the one that says "jimny" on the snorkell

if so I know there are few ppl on here that had bought it.... just dnt remember atm who.. go trough the rigs section


No. The description doesn't match. This one seems better.
Author:  BertZook [ Thu Apr 19, 2012 12:11 pm ]
Post subject:  Re: Scintex Jimny snorkel from Ebay.
8) noice


now that I remember, the other one was fiberglass?? I do remember a bit of discussion about the fact it could break vs being so cheap


so whos gonna be the test dummy for this kit pompoms
Author:  zooky08 [ Thu Apr 19, 2012 12:17 pm ]
Post subject:  Re: Scintex Jimny snorkel from Ebay.
BertZook wrote:

so whos gonna be the test dummy for this kit pompoms
you :lol:
Author:  Scales [ Thu Apr 19, 2012 2:47 pm ]
Post subject:  Re: Scintex Jimny snorkel from Ebay.
Agrajagzz9 was the bloke that has one
here it is here parked next to my rig
PM him and ask him what he rekons, that pic was a while back. i remember the head for it was the only different looking bit, but that was comparing it to the airtek, it looked a bit cheaper but you could just swap with an airtek head. the rest was pretty much identical from what i could tell (didnt pop the hood but). If you look REALLY closely you can see it has "Jimny" written on it.
Image
Author:  BertZook [ Thu Apr 19, 2012 5:44 pm ]
Post subject:  Re: Scintex Jimny snorkel from Ebay.
zooky08 wrote:
BertZook wrote:

so whos gonna be the test dummy for this kit pompoms
you :lol:


well if u do a donation to the "BertZook's Jimny needs mods fundraiser" I'll be more than happy to test it out :thefinger:
Author:  BertZook [ Thu Apr 19, 2012 5:52 pm ]
Post subject:  Re: Scintex Jimny snorkel from Ebay.
btw doing a quick search I found the other tread viewtopic.php?f=1&t=28314&hilit=jimny+snorkel+ebay

and the ebay link to the other snorkel (if its not the same one)

http://www.ebay.co.uk/itm/200681982225? ... 1423.l2648
Author:  ak47 [ Fri Apr 20, 2012 4:23 am ]
Post subject:  Re: Scintex Jimny snorkel from Ebay.
Cheers for all the input guys.
Think I am going to go ahead and get one, seems like all feedback/opinions are positive.

Will take some more pics of it when it arrives.

AK
Author:  ak47 [ Thu Jul 19, 2012 9:14 am ]
Post subject:  Re: Scintex Jimny snorkel from Ebay.
Well, my snorkel finally arrived, looks pretty good.

Will post a pic of the kit once I work out how.
Image

Hopefully that works...

Now I just need to get it installed. Does anyone happen to know who would do this? I have rung ARB, who only install their own snorkels, and a few other places in cairns, though most are only interested in installing the ones they supply (which is fair enough, though a tad frustrating).

Just wondering if anyone knows of a good installer in cairns (or preferably Innisfail) who would do this. Otherwise, back to the phone book!
Author:  drewhoo [ Thu Jul 19, 2012 10:55 am ]
Post subject:  Re: Scintex Jimny snorkel from Ebay.
Squibby installed mine pompoms my idea of a workshop is my 1mx1m city balcony :(

If you have any mates (or even your normal mechanic at a pinch) with a decent workshop, they can cut/drill the holes to the template (with a test fit of the snorkel, as the template isnt reliable), and rivet the top bracket (if design is the same as ours), much less than an hour of work. Only tool they may not have is a correctly-size hole saw for the guard through to the airbox.

You just drive it home and do the de-burring (sandpaper) and painting (few layers of undercoat around the new holes) yourself, then bolting of the snorkel on, as thats the timewasting part.
Author:  -QIK- [ Sun Jul 22, 2012 10:00 pm ]
Post subject:  Re: Scintex Jimny snorkel from Ebay.
If you come to Townsville I can help you fit it. I did mine on my jimmy. Took maybe an hour to do and was easy as.

Just don't watch when someone cuts a hole in your guard.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/