auszookers.com
https://auszookers.com/forum/

spring reccomendations for RUF
https://auszookers.com/forum/viewtopic.php?f=5&t=31955		 Page 1 of 1
Author:  wagn8u [ Thu Apr 19, 2012 9:44 pm ]
Post subject:  spring reccomendations for RUF
Hay guys,

As ive mentioned earlier, im new to sierras but am considering completeing a RUF on my 85 drover. Just wondering if anyone can give me some reccomendations for springs, i want to lift it about 2 inches in the process

:peaceout:
Author:  Gwagensteve [ Thu Apr 19, 2012 9:49 pm ]
Post subject:  Re: spring reccomendations for RUF
Stock rear springs will provide 2" of lift when used in the front. If you want more travel than stock springs provide, then you need to play with a "lifted" rear pack. The challenge is getting the right balance of height with enough spring rate to avoid excessive axle wrap. That's a different answer for everyone as tyres, lockers, gearing and terrain affect axle wrap as much as anything.
Steve.
Author:  SierraDan [ Thu Apr 19, 2012 9:51 pm ]
Post subject:  Re: spring reccomendations for RUF
Depends on how you do it. If i had stock rear springs in the front of mine i'd lose my lift.
Author:  Moph [ Fri Apr 20, 2012 12:43 pm ]
Post subject:  Re: spring reccomendations for RUF
There's a bit of a writeup in my build thread about RUF and spring lengths ... just what I found when playing with mine. Click my sig link.
Author:  twitchy [ Sat Apr 21, 2012 9:05 pm ]
Post subject:  Re: spring reccomendations for RUF
When I was doing the Frankenrolla ( should of finished it) I was going to use corolla leaf springs in the rear. so RUF & Rolla possibly?!?
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/