www.suzukiinfo.com
there are workshop manuals on there for most sierras. download and you shall find the info...as well as a lot of other info for your zook.
| auszookers.com https://auszookers.com/forum/ |
|
| removing sierra dash? https://auszookers.com/forum/viewtopic.php?f=5&t=3203 |
Page 1 of 1 |
| Author: | Cade [ Sun Oct 19, 2008 11:06 pm ] |
| Post subject: | removing sierra dash? |
hey guys chasing a bit of advice im looking to remove my interior dash and surrounds to paint them to give the interior an update dont need advice on the prep and paint issue as i have done that before however how easy/hard is it to remove the dash and surround of a 92 sierra?? any help or guides fellas i did a search came up with zero Cade |
|
| Author: | dank [ Sun Oct 19, 2008 11:09 pm ] |
| Post subject: | Re: removing sirra dash? |
www.suzukiinfo.com there are workshop manuals on there for most sierras. download and you shall find the info...as well as a lot of other info for your zook.
|
|
| Author: | steve [ Sun Oct 19, 2008 11:10 pm ] |
| Post subject: | Re: removing sirra dash? |
easy and also can be a bit fiddly with the vent tubes as they fall out all over the place and may be annoying to put back in , in the right place. generally it's all easy stuff.. and explains itself as it goes. you have a few screw covers on top of the dash too. and sometimes the cables that connect to the heater can be annoying but you'll figure it out. |
|
| Author: | Cade [ Sun Oct 19, 2008 11:10 pm ] |
| Post subject: | Re: removing sierra dash? |
chers mate |
|
| Author: | Cade [ Sun Oct 19, 2008 11:13 pm ] |
| Post subject: | Re: removing sierra dash? |
its the annoying lil fiddly bits i hate as whenever i take something off im always left with a few bolts with no idea where they go hahaha |
|
| Author: | lump_a_charcoal [ Sun Oct 19, 2008 11:31 pm ] |
| Post subject: | Re: removing sierra dash? |
My dad rebuilt a Corona engine about 15 years ago, he was left with 6 bolts... Yeah anyway, go crazy with marking stuff - even if you think it may be easy to figure out where it goes later on, mark it anyway. |
|
| Author: | Taff [ Mon Oct 20, 2008 12:39 am ] |
| Post subject: | Re: removing sierra dash? |
get a big peice of cardboard and stab the bolts/screws into it. then you can write in pen where they came from. they wont roll away either. I always tell myself i will do this, but end up with a pile of bolts in my socket set lid. |
|
| Author: | Cozook [ Mon Oct 20, 2008 12:40 am ] |
| Post subject: | Re: removing sierra dash? |
You just repainting stock colours cade? Or ya gunna bling it with the Benneton look? 
|
|
| Author: | Damo [ Mon Oct 20, 2008 12:51 am ] |
| Post subject: | Re: removing sierra dash? |
Taff wrote: get a big peice of cardboard and stab the bolts/screws into it. then you can write in pen where they came from. they wont roll away either.
I always tell myself i will do this, but end up with a pile of bolts in my socket set lid. Keep your beer cartons for this! |
|
| Author: | Cade [ Mon Oct 20, 2008 1:27 am ] |
| Post subject: | Re: removing sierra dash? |
well the seats are black and door trims are the pattern of black and dark gray pretty nice so im planning on black carpet (dont plan on too serious off roading) and then painting the dash black i got dodge black and toyota 202 in the shed but not sure if i will smooth the dash first anyone know if the carpets you can order on ebay are ok for sierras they say they are but has anyone got one previous |
|
| Author: | lump_a_charcoal [ Mon Oct 20, 2008 9:33 am ] |
| Post subject: | Re: removing sierra dash? |
Carpet? What is this carpet that you speak of? |
|
| Author: | Chinny [ Mon Oct 20, 2008 10:23 am ] |
| Post subject: | Re: removing sierra dash? |
Damo wrote: Keep your beer cartons for this! So thats what they're for |
|
| Author: | Cade [ Mon Oct 20, 2008 3:48 pm ] |
| Post subject: | Re: removing sierra dash? |
there is a ebay shop selling moulded sierra carpets 
type in suzuki carpets and you will find it only 150 |
|
| Author: | Hybrid [ Mon Oct 20, 2008 6:47 pm ] |
| Post subject: | Re: removing sierra dash? |
Damo wrote: Taff wrote: get a big peice of cardboard and stab the bolts/screws into it. then you can write in pen where they came from. they wont roll away either. I always tell myself i will do this, but end up with a pile of bolts in my socket set lid. Keep your beer cartons for this! Nah polystyrene foam lids from the those fruit store veggie boxes are the upmarket way of doing them. That way beer cartons can be kept for there rightful use, as hats or helmets depending how big your head is. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|