I wouldn't buy another xrox bar
| auszookers.com https://auszookers.com/forum/ |
|
| Jimny front bar mounts ? help https://auszookers.com/forum/viewtopic.php?f=5&t=32037 |
Page 1 of 1 |
| Author: | bigdogdazza [ Mon Apr 23, 2012 2:59 am ] |
| Post subject: | Jimny front bar mounts ? help |
Ok I own a 98 Jimny and wish to fit an XROX bar to it, the manufacturer says will fit 05+ but not sure about 98? Are they the same mounting point wise? |
|
| Author: | monley [ Mon Apr 23, 2012 5:56 am ] |
| Post subject: | Re: Help with Jimny Please guys! |
It will fit. You just need to knock off some little tabs on the front of the chassis rails from memory. |
|
| Author: | bigdogdazza [ Mon Apr 23, 2012 11:24 am ] |
| Post subject: | Re: Help with Jimny Please guys! |
Ok thanks as they told me of I modify the bar will void warranty on it etc which I think is crap when paying over 1k for a bit of steel |
|
| Author: | monley [ Mon Apr 23, 2012 11:53 am ] |
| Post subject: | Re: Help with Jimny Please guys! |
I wouldn't buy another xrox bar
|
|
| Author: | Ranga [ Wed Apr 25, 2012 1:45 am ] |
| Post subject: | Re: Help with Jimny Please guys! |
you wouldn't? why's det? |
|
| Author: | zukenutter [ Wed Apr 25, 2012 4:22 pm ] |
| Post subject: | Re: Help with Jimny Please guys! |
monley wrote: I wouldn't buy another xrox bar I thought you liked your XROX |
|
| Author: | zooky08 [ Wed Apr 25, 2012 6:28 pm ] |
| Post subject: | Re: Help with Jimny Please guys! |
zukenutter wrote: monley wrote: I wouldn't buy another xrox bar I thought you liked your XROX he does now 
|
|
| Author: | monley [ Wed Apr 25, 2012 6:46 pm ] |
| Post subject: | Re: Help with Jimny Please guys! |
zukenutter wrote: monley wrote: I wouldn't buy another xrox bar I thought you liked your XROX I do like It! What I don't like is the final finish on the bar, the hoop, and the over all construction of the bar mounts. With a bit of chopping and welding the bar is much bettera
|
|
| Author: | BertZook [ Wed Apr 25, 2012 7:44 pm ] |
| Post subject: | Re: Help with Jimny Please guys! |
monley wrote: zukenutter wrote: monley wrote: I wouldn't buy another xrox bar I thought you liked your XROX I do like It! What I don't like is the final finish on the bar, the hoop, and the over all construction of the bar mounts. With a bit of chopping and welding the bar is much bettera uh?? 
|
|
| Author: | monley [ Thu Apr 26, 2012 9:49 pm ] |
| Post subject: | Re: Jimny front bar mounts ? help |
  Big silly hoop  Big silly hoop goneski   Other thing's i did were make the chassis mount's a better 'fit' so there was less movement on them, chopped 20mm of the ends of the wing's on the lower and upper toobe's( stop tyres rubbing), then welded steel caps on the end tooobes because the bar normally comes with little push in caps that always come out and then you end up with mud&shit in the toobes. I also cleaned up some of other welds and cut of the tabs for the spotties that go in the wing's 
|
|
| Author: | Ranga [ Fri Apr 27, 2012 1:20 am ] |
| Post subject: | Re: Jimny front bar mounts ? help |
that actually look a balls load better |
|
| Author: | PORL [ Wed Apr 03, 2013 8:22 pm ] |
| Post subject: | Re: Jimny front bar mounts ? help |
I like the big silly hoop. I'm actually buying one of these this sat. Looking forward to it |
|
| Author: | 701let [ Mon Oct 20, 2014 2:01 pm ] |
| Post subject: | Re: Jimny front bar mounts ? help |
Hi there, Love the look of this beast. Can i ask what size wheels and offset you are running? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|