| auszookers.com https://auszookers.com/forum/ |
|
| g16b identification and numbers on cylinder head? https://auszookers.com/forum/viewtopic.php?f=5&t=32083 |
Page 1 of 1 |
| Author: | tsock0 [ Tue Apr 24, 2012 8:17 pm ] |
| Post subject: | g16b identification and numbers on cylinder head? |
hi all ive just purchaced a reco head for a g16b and was wondering why both heads have different markings on them. both heads are from 93 mod vitara efi and are exactly the same only they read like this original. inside the head has marked 3. side of head , S-3 16 7 camshaft R3J head i just bought inside head has marked YA7 Y1W 2 side of head S-10 27 D camshaft R4C i was also wondering if the cams are the same or one is bigger? any help would be much appreciated 
|
|
| Author: | want33s [ Tue Apr 24, 2012 8:35 pm ] |
| Post subject: | Re: g16b identification and numbers on cylinder head? |
As castings are made the cast wears and needs to be touched up. Every revision is recorded with numbers or X's on the product. If both are 93 Vit G16B I'd say the cams are identical. Not hard to check if you have a degree wheel and a dial gauge. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|