someone has to know Royce? Damo? come on
| auszookers.com https://auszookers.com/forum/ |
|
| Oil Pressure Sender Question https://auszookers.com/forum/viewtopic.php?f=5&t=3219 |
Page 1 of 1 |
| Author: | Mike [ Wed Oct 22, 2008 2:08 am ] |
| Post subject: | Oil Pressure Sender Question |
what size thread is on the oil pressure sender on g13? Cheers |
|
| Author: | Mike [ Thu Oct 23, 2008 2:22 am ] |
| Post subject: | Re: Oil Pressure Sender Question |
someone has to know Royce? Damo? come on
|
|
| Author: | Cozook [ Thu Oct 23, 2008 2:56 am ] |
| Post subject: | Re: Oil Pressure Sender Question |
Its about three posts now.....(What size thread..get it get it...hahahaha) |
|
| Author: | royce [ Thu Oct 23, 2008 10:57 am ] |
| Post subject: | Re: Oil Pressure Sender Question |
I would imagine 1/8" BSP but I have NFI |
|
| Author: | Rockhopper [ Thu Oct 23, 2008 11:00 am ] |
| Post subject: | Re: Oil Pressure Sender Question |
Cozook wrote: Its about three posts now.....(What size thread..get it get it...hahahaha)
Had to read it 3 time before I got it  then i laughed, you gooba. Seriously though, from memory, most Asian made cars have a 0.75mm thread on the oil pressure switch from memory, but don't hold me to that.
|
|
| Author: | Mike [ Thu Oct 23, 2008 11:27 pm ] |
| Post subject: | Re: Oil Pressure Sender Question |
so thats the pitch of the thread right? what i'm trying to work out is what size die i need to get to rethread an adaptor |
|
| Author: | royce [ Thu Oct 23, 2008 11:37 pm ] |
| Post subject: | Re: Oil Pressure Sender Question |
if you can find out what thread it is you can get an adaptor to suit hint, VDO have all the onfo, they probably have a website |
|
| Author: | Mike [ Fri Oct 24, 2008 12:37 am ] |
| Post subject: | Re: Oil Pressure Sender Question |
haha i got a vdo adaptor but the thread is wrong where it screws into the block (the other threads on it are the right one) |
|
| Author: | royce [ Fri Oct 24, 2008 12:38 am ] |
| Post subject: | Re: Oil Pressure Sender Question |
there are about 27 different adaptors, you have to get the right combination |
|
| Author: | Mike [ Fri Oct 24, 2008 12:41 am ] |
| Post subject: | Re: Oil Pressure Sender Question |
but that would involve me ordering one from somewhere and having to wait months and months and months i thought i might just be able to make the one i've got fit
|
|
| Author: | royce [ Fri Oct 24, 2008 12:44 am ] |
| Post subject: | Re: Oil Pressure Sender Question |
youd have to order the die to thread it anyway |
|
| Author: | Mike [ Fri Oct 24, 2008 12:45 am ] |
| Post subject: | Re: Oil Pressure Sender Question |
so it wouldn't be a standard thread? |
|
| Author: | rustylj [ Sat Oct 25, 2008 1:53 am ] |
| Post subject: | Re: Oil Pressure Sender Question |
1/8 bsp fits fine |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|