auszookers.com
https://auszookers.com/forum/

Replacing Sierra seats.
https://auszookers.com/forum/viewtopic.php?f=5&t=32217		 Page 1 of 1
Author:  William [ Mon Apr 30, 2012 5:47 pm ]
Post subject:  Replacing Sierra seats.
G'day everyone, I am sure it would have been talked about before but i am just wondering what seats i should get for my 91 sierra. I want some seats a bit more comfy (the drivers seat in the big girl is rooted) and seats that fit in pretty easy without taking up to much space. I would like ones with a skinny back rest to maximise space and leg room.

Any tips would be great!
Author:  runtbase [ Mon Apr 30, 2012 5:48 pm ]
Post subject:  Re: sierra seats
Swift seats
Author:  William [ Mon Apr 30, 2012 5:51 pm ]
Post subject:  Re: sierra seats
I had a look at swift seats today and i thought they are a bit chunky for the space in the sierra. Have you used them?
Author:  jono165 [ Mon Apr 30, 2012 6:04 pm ]
Post subject:  Re: sierra seats
N13 Nissan pulsar seats. Soo much more comfy.

Sierra rails bolt straight on to pulsar seats. I had to drill 2 holes on the drivers door side for the drivers seat to bolt up. There's heaps of n13 pulsars at wreckers so they are easy to get. They have decent lumbar support and deep bolsters which hold you in.
Author:  William [ Mon Apr 30, 2012 6:08 pm ]
Post subject:  Re: sierra seats
Thanks thats a good help! I was also looking a at honda civic today and they also look good. Will see if there is any nissans there tomorrow!
Author:  jono165 [ Mon Apr 30, 2012 6:14 pm ]
Post subject:  Re: sierra seats
Image
If u need any pics of where I drilled holes I can send them to you. The passenger rails were a tight fit to get to bolt back in the stock holes. You may need to enlarge the hole in the rail slightly

The drivers side I had to drill one holes further out on the door side rail mounts.
Author:  William [ Mon Apr 30, 2012 6:18 pm ]
Post subject:  Re: sierra seats
Do you know what year the car was?
Author:  jono165 [ Mon Apr 30, 2012 6:27 pm ]
Post subject:  Re: sierra seats
The car I pulled them out of was a 1990 model. I think the n13 was 1986-90
Author:  want33s [ Mon Apr 30, 2012 6:37 pm ]
Post subject:  Re: sierra seats
Holden Astra is worth a look too... Holdens Pulsar..
Author:  stockman [ Mon Apr 30, 2012 6:43 pm ]
Post subject:  Re: sierra seats
Mazda 121 bubble seats are quite a comfy seat. I've had them in a few rotors and they hug quite nice.
I don't mind the stock Sierra seats, but if I was to replace them I would be going with Recaros.
Author:  Fatzook [ Mon Apr 30, 2012 6:44 pm ]
Post subject:  Re: sierra seats
stockman wrote:
I don't mind the stock Sierra seats, but if I was to replace them I would be going with Recaros.



THIS GUY!!!

Armsup
Author:  William [ Mon Apr 30, 2012 6:46 pm ]
Post subject:  Re: sierra seats
Thanks I will have a look see if there are any there tomorrow.. theres 5000 cars in the yard in cooma should have a chance. I dont want to spend to much on them and im guessing recaros are worth a fair bit.
Author:  atari4x4 [ Mon Apr 30, 2012 7:12 pm ]
Post subject:  Re: sierra seats
Fatzook wrote:
stockman wrote:
I don't mind the stock Sierra seats, but if I was to replace them I would be going with Recaros.



THIS GUY!!!

Armsup


+1 :peaceout:
Author:  Joshyboy26 [ Mon Apr 30, 2012 7:25 pm ]
Post subject:  Re: Replacing Sierra seats.
do not buy astra seats my missus has a 01 astra and the seats are f#*@&^#d, we drove about 5 hours and my back was killing me, they are way to hard IMO.
Author:  atari4x4 [ Mon Apr 30, 2012 7:27 pm ]
Post subject:  Re: Replacing Sierra seats.
2001 astra is a completely different kettle of fish to the late 80's N13 pular/astra
Author:  Joshyboy26 [ Mon Apr 30, 2012 7:46 pm ]
Post subject:  Re: Replacing Sierra seats.
yeah ok fair enough, just sayin is all.. :D
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/