| auszookers.com https://auszookers.com/forum/ |
|
| Sierra gearbox jammed in first. https://auszookers.com/forum/viewtopic.php?f=5&t=32744 |
Page 1 of 1 |
| Author: | luke1122 [ Sun May 20, 2012 5:47 pm ] |
| Post subject: | Sierra gearbox jammed in first. |
can anyone give me any advise on what to do or should i just get a new box? i took the selector off the topof the box and couldnt budge the gear fork |
|
| Author: | boostedbrick [ Sun May 20, 2012 7:02 pm ] |
| Post subject: | Re: gearbox jamed in 1st |
So it stuck in gear with the stick still in the box? |
|
| Author: | luke1122 [ Sun May 20, 2012 10:43 pm ] |
| Post subject: | Re: gearbox jamed in 1st |
yer with the leaver in i can move the selector side to side but it wont come outs first |
|
| Author: | luke1122 [ Mon May 21, 2012 8:51 pm ] |
| Post subject: | Re: Sierra gearbox jammed in first. |
so nobody can help me? |
|
| Author: | Fatzook [ Mon May 21, 2012 9:08 pm ] |
| Post subject: | Re: Sierra gearbox jammed in first. |
Can you take the shifter out of the gearbox, and get a pic of the selector rods beneath? They may need to be realigned. Also is the shifter bush still intact? |
|
| Author: | boostedbrick [ Tue May 22, 2012 8:48 am ] |
| Post subject: | Re: Sierra gearbox jammed in first. |
Fatzook wrote: Can you take the shifter out of the gearbox, and get a pic of the selector rods beneath? They may need to be realigned. Also is the shifter bush still intact? This is what I was thinking, but I couldn't see how it could happen with the shifter still in place 
|
|
| Author: | mnemonix [ Tue May 22, 2012 9:07 am ] |
| Post subject: | Re: Sierra gearbox jammed in first. |
If the end of the shifter is worn (rounded corners) It can jam in gear while still in place. Have had it happen to me on occasions during some fast n furious low range shifting. As above, pull the stick, check the shift rods are aligned correctly. They should form a square hole like this: [ ] I'd suspect one of yours is offset. |
|
| Author: | Fatzook [ Tue May 22, 2012 11:17 am ] |
| Post subject: | Re: Sierra gearbox jammed in first. |
boostedbrick wrote: Fatzook wrote: Can you take the shifter out of the gearbox, and get a pic of the selector rods beneath? They may need to be realigned. Also is the shifter bush still intact? This is what I was thinking, but I couldn't see how it could happen with the shifter still in place Its the same problem the transfers get. Check that the shifter bush is in good condition. Check that the locator bolt is still there ( it keys into the slot on the ball of the shifter), and check that the shifter rods are aligned. |
|
| Author: | atari4x4 [ Tue May 22, 2012 1:26 pm ] |
| Post subject: | Re: Sierra gearbox jammed in first. |
some helpful tech & pics in this thread viewtopic.php?f=5&t=12104&hilit=shifter+bolt |
|
| Author: | luke1122 [ Tue May 22, 2012 7:23 pm ] |
| Post subject: | Re: Sierra gearbox jammed in first. |
ok thanks guys in have a look and if i have dramas ill put some pics up cheers guy's |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|