auszookers.com • View topic - Sierra gearbox jammed in first.

Board index » Talking About Stuff » Suzuki Talk

Sierra gearbox jammed in first.

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

luke1122

Joined: Mon May 02, 2011 8:13 am
Posts: 142
Location: gold coast

Posted: Sun May 20, 2012 5:47 pm

can anyone give me any advise on what to do or should i just get a new box?
i took the selector off the topof the box and couldnt budge the gear fork

boostedbrick

az supporter

Joined: Tue Jun 29, 2010 7:44 am
Posts: 2003
Location: Brisbane
Vehicle: 2018 DMAX

Posted: Sun May 20, 2012 7:02 pm

So it stuck in gear with the stick still in the box?

luke1122

Joined: Mon May 02, 2011 8:13 am
Posts: 142
Location: gold coast

Posted: Sun May 20, 2012 10:43 pm

yer with the leaver in
i can move the selector side to side but it wont come outs first

luke1122

Joined: Mon May 02, 2011 8:13 am
Posts: 142
Location: gold coast

Posted: Mon May 21, 2012 8:51 pm

so nobody can help me?

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Mon May 21, 2012 9:08 pm

Can you take the shifter out of the gearbox, and get a pic of the selector rods beneath? They may need to be realigned.

Also is the shifter bush still intact?

_________________
2013 GV
1998 SV420 ute

boostedbrick

az supporter

Joined: Tue Jun 29, 2010 7:44 am
Posts: 2003
Location: Brisbane
Vehicle: 2018 DMAX

Posted: Tue May 22, 2012 8:48 am

Fatzook wrote:

Can you take the shifter out of the gearbox, and get a pic of the selector rods beneath? They may need to be realigned.

Also is the shifter bush still intact?

This is what I was thinking, but I couldn't see how it could happen with the shifter still in place

mnemonix

az supporter

Joined: Sun Aug 16, 2009 11:30 pm
Posts: 1409
Location: Newcastle NSW
Vehicle: '96 LWB trayback

Posted: Tue May 22, 2012 9:07 am

If the end of the shifter is worn (rounded corners) It can jam in gear while still in place. Have had it happen to me on occasions during some fast n furious low range shifting.

As above, pull the stick, check the shift rods are aligned correctly. They should form a square hole like this: [ ]
I'd suspect one of yours is offset.

_________________
Twin charged twin cam twin locked webwheeler

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Tue May 22, 2012 11:17 am

boostedbrick wrote:

Fatzook wrote:

Can you take the shifter out of the gearbox, and get a pic of the selector rods beneath? They may need to be realigned.

Also is the shifter bush still intact?

This is what I was thinking, but I couldn't see how it could happen with the shifter still in place

Its the same problem the transfers get.

Check that the shifter bush is in good condition. Check that the locator bolt is still there ( it keys into the slot on the ball of the shifter), and check that the shifter rods are aligned.

_________________
2013 GV
1998 SV420 ute

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34843
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Tue May 22, 2012 1:26 pm

some helpful tech & pics in this thread viewtopic.php?f=5&t=12104&hilit=shifter+bolt

_________________
You're just hating because you don't understand

luke1122

Joined: Mon May 02, 2011 8:13 am
Posts: 142
Location: gold coast

Posted: Tue May 22, 2012 7:23 pm

ok thanks guys in have a look and if i have dramas ill put some pics up cheers guy's

Page 1 of 1

[ 10 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 274 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum