auszookers.com
https://auszookers.com/forum/

Sierra Horn Stopped Working
https://auszookers.com/forum/viewtopic.php?f=5&t=32896		 Page 1 of 1
Author:  alien [ Sat May 26, 2012 3:12 pm ]
Post subject:  Sierra Horn Stopped Working
Hey guys, any ideas? I thought it was just dirty contacts behind the cover thingo, but after giving it a good clean up i've still got nothing... figured i might as well just ask rather than spending ages trying to work out whats going on... last weekend is when it stopped working - i went to toot twice, worked once then had nothing since.

Thoughts??
Author:  SierraDan [ Sat May 26, 2012 3:51 pm ]
Post subject:  Re: Sierra Horn Stopped Working
Fuse? Connections in the steering wheel?
Author:  suzukikid [ Sat May 26, 2012 5:48 pm ]
Post subject:  Re: Sierra Horn Stopped Working
i have the same thing.....just yell out! haha
Author:  alien [ Sat May 26, 2012 5:50 pm ]
Post subject:  Re: Sierra Horn Stopped Working
i didnt think the horn had a fuse??? does it?

Spose i'll pull the steering wheel off tomorrow and see what i can see.

as for yelling out, doesnt work =) and with WA drivers being as shit as they are you frequently need to let them know you're there when they try to cut you off!
Author:  want33s [ Sat May 26, 2012 5:50 pm ]
Post subject:  Re: Sierra Horn Stopped Working
If you hold the horn depressed and turn the wheel does it work?
Author:  alien [ Sat May 26, 2012 5:54 pm ]
Post subject:  Re: Sierra Horn Stopped Working
Just gave that a try... nope, nothing. Even turned IGN on just in case (and to release the steering lock).
Author:  Reubs [ Sat May 26, 2012 7:10 pm ]
Post subject:  Re: Sierra Horn Stopped Working
Have you tried taking the steering wheel off and earthing the copper rod that sticks out of the combo switch bit?

If the horn sounds when this happens then i'd say it's worn down too far. You could try soldering a bit on the end.

Also, check your steering column is earthed - there is a spring in the rag joint next to the steering box for this.
Author:  alien [ Sat May 26, 2012 7:17 pm ]
Post subject:  Re: Sierra Horn Stopped Working
thanks mate i'll check that out tomorrow =)
Author:  christover1 [ Sat May 26, 2012 7:23 pm ]
Post subject:  Re: Sierra Horn Stopped Working
My money is on the metal connecter in the rag joint
Author:  alien [ Sat May 26, 2012 7:38 pm ]
Post subject:  Re: Sierra Horn Stopped Working
whats the solution if the rag joint is shot?
Author:  christover1 [ Sat May 26, 2012 7:42 pm ]
Post subject:  Re: Sierra Horn Stopped Working
I ran a wire around, temporarily,
stayed that way for years.

Its just that the rubber can't conduct current.
Author:  christover1 [ Sat May 26, 2012 7:44 pm ]
Post subject:  Re: Sierra Horn Stopped Working
http://www2.izook.com/?page_id=325
Author:  alien [ Sat May 26, 2012 8:22 pm ]
Post subject:  Re: Sierra Horn Stopped Working
Cool, thanks mate =)
Author:  MacDaddy [ Sun May 27, 2012 12:28 am ]
Post subject:  Re: Sierra Horn Stopped Working
Those stock electric horns dont like mud and water in them, the actual horn may be dead... time to get rid of the electric horn, and get some air horns fitted... :wink: :D
Author:  christover1 [ Sun May 27, 2012 9:03 am ]
Post subject:  Re: Sierra Horn Stopped Working
MacDaddy wrote:
Those stock electric horns dont like mud and water in them, the actual horn may be dead... time to get rid of the electric horn, and get some air horns fitted... :wink: :D

I moved my Vitara horn to up high on firewall, because it stopped working full of mud.
A good fush and some wd40 got it working.
So Yes, that is worth a look at.

I may have ahorn left over from my Sierra, if thats the issue.
Author:  alien [ Sun May 27, 2012 1:38 pm ]
Post subject:  Re: Sierra Horn Stopped Working
alrighty... steering wheel all cleaned up and contacts all good... no dice.

so i unplugged the horn's crimp plugs and ran a wire from one to the battery, and a wire from the other to various metal on the body and chassis (and vice versa in case polarity matters) and the horn still didnt go off... so im guessing the horn itself has shat it - im guessing what i've done is a good enough test to confirm that???

I've even taken the horn out and tried to wire it to the battery that way and its still not working.

Rag joint on the steering looks fine, although dirty... everything has been hit with inox.
Author:  christover1 [ Sun May 27, 2012 2:05 pm ]
Post subject:  Re: Sierra Horn Stopped Working
inox up the throat of the horn may work.
After WD40 I had to retune mine before it worked well.
Theres a screw lock nut thingy on them.
Or new ones ain't much.
Author:  BlueSuzy [ Sun May 27, 2012 2:55 pm ]
Post subject:  Re: Sierra Horn Stopped Working
My horn always worked when i didnt want it to, Then didnt work when i wanted it to. I pulled the fuse. Fixed.
Author:  alien [ Sun May 27, 2012 2:58 pm ]
Post subject:  Re: Sierra Horn Stopped Working
bought a narva high tone one:
Image
90mm dia. frequency 450 Hz
Decibel rating 112dB

fuck its loud! hahahaha

works perfectly.
Author:  coily96 [ Sun May 27, 2012 8:50 pm ]
Post subject:  Re: Sierra Horn Stopped Working
Twin air horns off barina, astra and vectra are good. Cost $10 from wreckers.
Author:  foolsp33d [ Sun May 27, 2012 9:07 pm ]
Post subject:  Re: Sierra Horn Stopped Working
http://www.ebay.com.au/itm/Stebel-Nauti ... 3a74a0f32a

personally run one of these..Straight off the standard horn plugs... Its pretty damn loud and alot less F-ing around and compact than the 3 tube airhorns and such..

Image
Author:  alien [ Sun May 27, 2012 11:03 pm ]
Post subject:  Re: Sierra Horn Stopped Working
hahah i looked at those nautilus ones a while back... they look INSANE - but way too expensive for me. That said, that's the cheapest i've seen one... most were closer to $100.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/