| auszookers.com https://auszookers.com/forum/ |
|
| Lovell springs for vitara https://auszookers.com/forum/viewtopic.php?f=5&t=33007 |
Page 1 of 1 |
| Author: | SQUIRREL [ Wed May 30, 2012 10:25 am ] |
| Post subject: | Lovell springs for vitara |
Has anyone used or tryed Lovell raised springs in a swb vitara Any feedback would be appreciated as I am looking into a set The price is right , but personally never used lovells before They claim 30mm lift Cheers |
|
| Author: | gotmud [ Thu May 31, 2012 12:04 am ] |
| Post subject: | Re: Lovell springs for vitara |
Hey mate, put them in my 91 vitara a couple of months ago. I got a decent amount of height from them, but was in a rush so didn’t take any measurements  They ride a bit rough on the standard vitara wheels and you will definitely need adjustable front camber bolts.
|
|
| Author: | SQUIRREL [ Thu May 31, 2012 6:49 am ] |
| Post subject: | Re: Lovell springs for vitara |
Thanks , I have camber bolts in at moment with flipped strut tops and 15mm front + 30mm rear spacers , and will remove these when springs go in ,,, got commo shocks on rear ,, did you have to put a tailshaft spacer in ? Or any others like brake lines etc ? |
|
| Author: | DarkHorse [ Thu May 31, 2012 1:28 pm ] |
| Post subject: | Re: Lovell springs for vitara |
Drive shaft and brake lines should be OK with a 30mm lift. Unclip the front lines from the point where they mount to the body (the next one upstream from the strut, next to the top of the spring):  If your rears get tight at full droop you can release them from the control arm retainer and/or the clip on the chassis: 
|
|
| Author: | SQUIRREL [ Mon Jun 04, 2012 8:06 am ] |
| Post subject: | Re: Lovell springs for vitara |
Cheers for the info / will post before and after when they arrive . |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|