Or here if you prefer ally blocks
viewtopic.php?f=15&t=13126
Scroll down the bottom of the page
| auszookers.com https://auszookers.com/forum/ |
|
| diy body lift kit https://auszookers.com/forum/viewtopic.php?f=5&t=33052 |
Page 1 of 1 |
| Author: | oz17ub [ Thu May 31, 2012 9:01 pm ] |
| Post subject: | diy body lift kit |
i acquired some 60mm solid aluminium bar and made some blocka up but i only made 8 as this is all i can see but when i look at kits for sale online they have 10 blocks. is this corrrect or will 8 be ok? |
|
| Author: | Fatzook [ Thu May 31, 2012 9:03 pm ] |
| Post subject: | Re: diy body lift kit |
For a SWB sierra? 10 blocks. And the 60mm diameter blocks won't fit at the back. And what have you done about the captive studs in the floor? The bolts aren't removable. |
|
| Author: | oz17ub [ Fri Jun 01, 2012 8:16 am ] |
| Post subject: | Re: diy body lift kit |
i pulled the blocks down to 52mm. was un aware of the captive studs thanks for the heads up what would you recommend? |
|
| Author: | BlueSuzy [ Fri Jun 01, 2012 8:21 am ] |
| Post subject: | Re: diy body lift kit |
I would recommend selling your blocks to someone with a Hilux and buying a kit off here. The studs are a pain unless you have female bolts, Which have to be high tensile if you want anything to be legit. Alot of work to cut out the studs and replace with bolts for a simple bodylift. |
|
| Author: | Zackary56 [ Sat Jun 02, 2012 5:48 pm ] |
| Post subject: | Re: diy body lift kit |
Wheres a good place to purchase a body lift? |
|
| Author: | shep [ Sat Jun 02, 2012 5:54 pm ] |
| Post subject: | Re: diy body lift kit |
viewtopic.php?f=15&t=15518 |
|
| Author: | abclarke [ Sat Jun 02, 2012 5:58 pm ] |
| Post subject: | Re: diy body lift kit |
shep wrote: http://www.auszookers.com/forum/viewtopic.php?f=15&t=15518 x2. Worth the money for sure! Its a great kit and comes with really good instructions. |
|
| Author: | Bruce [ Sat Jun 02, 2012 6:21 pm ] |
| Post subject: | Re: diy body lift kit |
abclarke wrote: shep wrote: http://www.auszookers.com/forum/viewtopic.php?f=15&t=15518 x2. Worth the money for sure! Its a great kit and comes with really good instructions. x3 |
|
| Author: | Rusho [ Sat Jun 02, 2012 6:42 pm ] |
| Post subject: | Re: diy body lift kit |
Or here if you prefer ally blocks viewtopic.php?f=15&t=13126 Scroll down the bottom of the page |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|