| auszookers.com https://auszookers.com/forum/ |
|
| Sierra - Commodore & Hilux suspension setup https://auszookers.com/forum/viewtopic.php?f=5&t=33063 |
Page 1 of 1 |
| Author: | 4x4xzook [ Fri Jun 01, 2012 3:27 pm ] |
| Post subject: | Sierra - Commodore & Hilux suspension setup |
Hey Guys i have done many search's about this setup. So far all i have learnt is; -rear vn commodore shocks for the front -rear hilux/2wd shocks for the rear. Has anyone installed this setup before? I am fairly new to suspension so any information would be greatfull!! will i need to relocate anything?? will it fit straight in??? my only disadvantage is i have no welder. However, i have access to someone who can weld!! If anyone has the tiem to write up something small with a guide on what to do that would be great!! - doesnt need to be long, just a few steps. Many thanks. |
|
| Author: | SierraDan [ Fri Jun 01, 2012 3:55 pm ] |
| Post subject: | Re: Sierra - Commodore & Hilux suspension setup |
There was a full write up.. I can't seem to find it now though. |
|
| Author: | 4x4xzook [ Fri Jun 01, 2012 8:14 pm ] |
| Post subject: | Re: Sierra - Commodore & Hilux suspension setup |
Bump. Lookin to do this over the weekend. |
|
| Author: | atari4x4 [ Fri Jun 01, 2012 8:31 pm ] |
| Post subject: | Re: Sierra - Commodore & Hilux suspension setup |
SierraDan wrote: There was a full write up.. I can't seem to find it now though. yeah it's MIA, it used to be in the old tech section where you could submit stuff... there are a few of the old ones on the front page but not the commy/hiace shock one. NFI where it is.  OP if you're just changing shocks it should just be remove/replace & measure for bumpstop extensions. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|