auszookers.com
https://auszookers.com/forum/

08 jimny water crossing fail ? engine warning light
https://auszookers.com/forum/viewtopic.php?f=5&t=33115		 Page 1 of 1
Author:  jordan [ Sun Jun 03, 2012 4:10 pm ]
Post subject:  08 jimny water crossing fail ? engine warning light
hey guys was at the power lines having some fun after all the rain

driving through some water it got deep fast and the air box filled with water ......motor turned its self off

i opened the air box to find it full of water :( .... i got all the water out to find a small drain hole that couldnt deal with the dirty mud water

fired it up no worries just some steam out the exhaust drove home no worries , but theres an engine light on ? can anyone give me some details on this ?



ps ill be buying a snorkel now lol
Author:  atari4x4 [ Sun Jun 03, 2012 4:26 pm ]
Post subject:  Re: 08 jimny water crossing fail ? engine warning light
might be buying a new motor before the snorkel.... 8O

should have check for water in the cylinders by removing the spark plugs before starting, does it still run smooth?

disconnecting the battery for a couple of minutes should clear the error code but really you want to get the codes out of the ECU first.
Author:  jordan [ Sun Jun 03, 2012 4:37 pm ]
Post subject:  Re: 08 jimny water crossing fail ? engine warning light
didnt have any tools with me :?
motor seems fine its running perfect , done about 100kays since the water
Author:  atari4x4 [ Sun Jun 03, 2012 4:43 pm ]
Post subject:  Re: 08 jimny water crossing fail ? engine warning light
not sure about the different series of jimny's but is this any help?

viewtopic.php?f=5&t=24815&p=442843&hilit=jimny+code#p442843

Moag wrote:
This is as far as I've got with understanding my little bus!! :blink:

Image



Moag's pictures were awes.... where are you Mr Moag?
Author:  alien [ Sun Jun 03, 2012 6:16 pm ]
Post subject:  Re: 08 jimny water crossing fail ? engine warning light
pull your dipstick and take off the oil filler cap and see if its gone milky... you might be lucky and get away with changing the oil and thats all.

next time check the depth of each puddle before you drive it =)
Author:  smiffkid [ Sun Jun 03, 2012 7:45 pm ]
Post subject:  Re: 08 jimny water crossing fail ? engine warning light
Could be a simple as leaving the air sensor off the airbox lid will bring up a engine light:)
Author:  Blakey [ Mon Jun 04, 2012 6:21 am ]
Post subject:  Re: 08 jimny water crossing fail ? engine warning light
could have also bent a conrod by trying to compress water. dunno how that would bring up a error code tho. and it would probably seize the engine. but trying to compress water in a engine usually causes problems cause you cant compress water.
Author:  stuartcarr2002 [ Mon Jun 04, 2012 7:15 am ]
Post subject:  Re: 08 jimny water crossing fail ? engine warning light
When I did the same in my 06 VVT, i was not as lucky as you and ended up with a massive knock in the bottom end. I put another motor in as I could not be stuffed mucking around with the engine, but once we got it started once we got all the water out of it, the engine light was on. Now I dont know if it has something to do with the internals that where stuffed or water had come in contact with the air flow sensor. Once I fitted the new motor the light has not come on. It maybe because the sensor dried out. I did not change the sensor. Cant be certain.
Author:  zukenutter [ Mon Jun 04, 2012 5:12 pm ]
Post subject:  Re: 08 jimny water crossing fail ? engine warning light
I'd change the oil
Author:  jordan [ Tue Jun 05, 2012 5:22 pm ]
Post subject:  Re: 08 jimny water crossing fail ? engine warning light
i dont think theres any damage to my engine internals (oil is gold ) no knocks and makes normal power

got around to changing the air cleaner today with a brand new one has soon has i started it up the light went out so problem over :D

cheers for ya help
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/