| auszookers.com https://auszookers.com/forum/ |
|
| HOW TO TELL WHAT YEAR MY TWINCAM HEAD IS???? https://auszookers.com/forum/viewtopic.php?f=5&t=33220 |
Page 1 of 1 |
| Author: | TWINCAM16 [ Wed Jun 06, 2012 3:02 pm ] |
| Post subject: | HOW TO TELL WHAT YEAR MY TWINCAM HEAD IS???? |
I've got a head from a suzuki swift gti twincam and am giving it a rebuild, the kits come in two different forms depending on year model and i was wondering if anyone could tell me how to work out what year the head is?? it has come off a 1600 vitara bottom end out of my sierra,  any hints on warming the engine while i'm doing the rebuild would be good too.
|
|
| Author: | masterA [ Wed Jun 06, 2012 3:09 pm ] |
| Post subject: | Re: HOW TO TELL WHAT YEAR MY TWINCAM HEAD IS???? |
There's not much difference at all If you're talking about a Suzuki swift 1300 GTi head....the earlier MK1's have a water gallery port open above the first cylinder while MK2/3 is blanked off |
|
| Author: | larry [ Wed Jun 06, 2012 4:42 pm ] |
| Post subject: | Re: HOW TO TELL WHAT YEAR MY TWINCAM HEAD IS???? |
cant help with the question at all but you should make a build thread or at least pics and info on your gti motor |
|
| Author: | TWINCAM16 [ Fri Jun 08, 2012 6:15 pm ] |
| Post subject: | Re: HOW TO TELL WHAT YEAR MY TWINCAM HEAD IS???? |
ok i'll get onto that. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|