auszookers.com
https://auszookers.com/forum/

Rear Quarter Pushed In
https://auszookers.com/forum/viewtopic.php?f=5&t=33231		 Page 1 of 1
Author:  primejo07 [ Wed Jun 06, 2012 7:59 pm ]
Post subject:  Rear Quarter Pushed In
Hey guys,

so on the weekend i was in the dunes, and i had to stop because of the guy infront of me. next thing i know a blue 60 series comes flying over the dune and bang straight into the back of me. :( I didnt even get a chance to get out before he was gone.. Im pretty pissed off to be honest. :x anyways... i need some advice on how to get the old girl back into shape.. the rear tailgate will need to be replaced because its nice and bent, and the rear right corner has been pushed in.. the hinges are ruined and the its kind of folded over itself.
Here are some pics

Image
Image
Image
Image

just wondering on how to just get it back into shape, i was thinking mabye a plank of wood behind the targa bar and then a jack with a long piece of wood to push it back out.. if that makes sense?

thanks guys :peaceout:
Author:  coily96 [ Wed Jun 06, 2012 8:11 pm ]
Post subject:  Re: Rear Quarter Pushed In
Take the tyre off and unbolt the tail gate. you might be able to push it back out. be careful not to bend the targa bar.
Author:  larry [ Wed Jun 06, 2012 10:34 pm ]
Post subject:  Re: Rear Quarter Pushed In
i would wipe the dirt off and call it good..
Author:  alien [ Wed Jun 06, 2012 11:04 pm ]
Post subject:  Re: Rear Quarter Pushed In
i would have chased down the fuckhead that did the hit and run, and rammed the front of my zuk into his POS to see how he likes it....
Author:  primejo07 [ Thu Jun 07, 2012 8:07 am ]
Post subject:  Re: Rear Quarter Pushed In
larry wrote:
i would wipe the dirt off and call it good..


i would do that mate but i cant close my tail gate at all and because the corners bent in, the whole tail gate sits on that angle too.
Author:  primejo07 [ Thu Jun 07, 2012 8:10 am ]
Post subject:  Re: Rear Quarter Pushed In
alien wrote:
i would have chased down the fuckhead that did the hit and run, and rammed the front of my zuk into his POS to see how he likes it....


i tried to keep my cool about it over the last few days but im honestly just so pissed off. Its dickheads like him that make me wanna stay on the road instead of on the tracks
Author:  Jerryx4 [ Thu Jun 07, 2012 8:29 am ]
Post subject:  Re: Rear Quarter Pushed In
go down there this weekend and wait for him
Author:  alien [ Thu Jun 07, 2012 8:30 am ]
Post subject:  Re: Rear Quarter Pushed In
i think you might need to see a panel beater =/ those corners will be a nightmare to get straight i reckon.

i've had good dealings with Barney and B-Ball Panel and Paint in Balcatta.
Author:  primejo07 [ Thu Jun 07, 2012 1:54 pm ]
Post subject:  Re: Rear Quarter Pushed In
Jerryx4 wrote:
go down there this weekend and wait for him


Id never find him mate, it was a long weekend, everyone goes up to the dunes and then goes back home to perth
Author:  primejo07 [ Thu Jun 07, 2012 1:55 pm ]
Post subject:  Re: Rear Quarter Pushed In
alien wrote:
i think you might need to see a panel beater =/ those corners will be a nightmare to get straight i reckon.

i've had good dealings with Barney and B-Ball Panel and Paint in Balcatta.


sadly i think youre right :/ ill give it a tap with a hammer and see how much i can do myself i guess.

alright thanks make ill give them a ring and get a quote, cheers!
Author:  reeceh [ Thu Jun 07, 2012 8:32 pm ]
Post subject:  Re: Rear Quarter Pushed In
Depending on your budget you can have a good crack at it yourself. You just have to use commOn sense. My ex gf crashed the front of her corolla. She didn't want to pay a panel beater what he wanted. So I told her I'd give it a crack. I chained her car to a solid pole. Then had chains hooked up in places back to my towball and let the auto take off very slowly and took of in different directions. Also if you can get tension on it and rock back and forward youcould flex stuff back to shape. Now it was a whole different car and it was the radiator support panel. It came up brilliant you could only spot a tiny difference in the headlight gap. Mind you it would be weak as piss now another frontal collision and it would write it off.

Not too sure if you could hook chains up without welding a bracket on. But I'm sure you could do something.
Author:  primejo07 [ Fri Jun 08, 2012 8:15 am ]
Post subject:  Re: Rear Quarter Pushed In
reeceh wrote:
Depending on your budget you can have a good crack at it yourself. You just have to use commOn sense. My ex gf crashed the front of her corolla. She didn't want to pay a panel beater what he wanted. So I told her I'd give it a crack. I chained her car to a solid pole. Then had chains hooked up in places back to my towball and let the auto take off very slowly and took of in different directions. Also if you can get tension on it and rock back and forward youcould flex stuff back to shape. Now it was a whole different car and it was the radiator support panel. It came up brilliant you could only spot a tiny difference in the headlight gap. Mind you it would be weak as piss now another frontal collision and it would write it off.

Not too sure if you could hook chains up without welding a bracket on. But I'm sure you could do something.


cheers mate that sounds like a good idea! if all else fails ill give that a go... ive got nothing to lose anyways.
I just got a new tailgate off tyron so im keen to get it bolted up :)
Author:  reeceh [ Fri Jun 08, 2012 10:41 am ]
Post subject:  Re: Rear Quarter Pushed In
That's exactly right. Nothing to lose. It is a Sierra not a Mercedes. And there's always someone wrecking one. Worst case scenario you fuck it. Find someone with a wreck to cut that whole section out and take it to a panel beater to get it stitched in. Then tell em you will paint it. Get them to do the hardwork and u to give it a crack finishing it off.
Author:  got_bar_work [ Fri Jun 08, 2012 2:40 pm ]
Post subject:  Re: Rear Quarter Pushed In
U could get a new tub for less then the panel beater would cost
Author:  reeceh [ Fri Jun 08, 2012 2:49 pm ]
Post subject:  Re: Rear Quarter Pushed In
Also true!! ^^^^
Author:  Goodtime [ Fri Jun 08, 2012 4:22 pm ]
Post subject:  Re: Rear Quarter Pushed In
bog it :)
Author:  SierraDan [ Fri Jun 08, 2012 5:16 pm ]
Post subject:  Re: Rear Quarter Pushed In
I just started putting hilux diffs and 37's on mine when I bent it :lol:
Author:  -giddy- [ Fri Jun 08, 2012 5:38 pm ]
Post subject:  Re: Rear Quarter Pushed In
Did anyone else notice the orange gun in the back of the sierra or was it just me?
Author:  Scrawny [ Fri Jun 08, 2012 6:05 pm ]
Post subject:  Re: Rear Quarter Pushed In
-giddy- wrote:
Did anyone else notice the orange gun in the back of the sierra or was it just me?


Na, that's just some left over pipes from the last job he was on......
Author:  alien [ Fri Jun 08, 2012 6:32 pm ]
Post subject:  Re: Rear Quarter Pushed In
its a "bait caster" =)

i doubt a new tub would be cheaper than a panel beater - he is in Perth.
Author:  primejo07 [ Fri Jun 08, 2012 6:42 pm ]
Post subject:  Re: Rear Quarter Pushed In
-giddy- wrote:
Did anyone else notice the orange gun in the back of the sierra or was it just me?


Thats actually a snatch strap haha... But those PVC pipes are spud guns :D
Author:  alien [ Fri Jun 08, 2012 6:52 pm ]
Post subject:  Re: Rear Quarter Pushed In
"Bait casters" officer... i put a spud down, then fire my line out to sea =)
Author:  primejo07 [ Fri Jun 08, 2012 6:54 pm ]
Post subject:  Re: Rear Quarter Pushed In
alien wrote:
"Bait casters" officer... i put a spud down, then fire my line out to sea =)


Haha oh I see what you did there ;)
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/