Mine was written on a sticker under the bonnet,
with a lot of other useful info,
but they can get hard to read.
Always ran well at 10* BTDC
| auszookers.com https://auszookers.com/forum/ |
|
| 1 litre sj40 timing? https://auszookers.com/forum/viewtopic.php?f=5&t=33278 |
Page 1 of 1 |
| Author: | Azza zook [ Fri Jun 08, 2012 9:28 pm ] |
| Post subject: | 1 litre sj40 timing? |
hey guys im having trouble finding the info on what the timing is ment to be on my 1 litre engine the timing belt went today and a mate tried starting it when the timing belt was out goin to get my new one tomorrow but need to no what to set it at if anyone could help me that would be great thanks aaron |
|
| Author: | Jackson [ Fri Jun 08, 2012 9:29 pm ] |
| Post subject: | Re: 1 litre sj40 timing? |
10 degrees BTDC |
|
| Author: | Azza zook [ Fri Jun 08, 2012 9:32 pm ] |
| Post subject: | Re: 1 litre sj40 timing? |
thanks mate could find it anywhere thanks for you help mate |
|
| Author: | christover1 [ Fri Jun 08, 2012 10:44 pm ] |
| Post subject: | Re: 1 litre sj40 timing? |
Mine was written on a sticker under the bonnet, with a lot of other useful info, but they can get hard to read. Always ran well at 10* BTDC
|
|
| Author: | birko [ Sat Jun 09, 2012 11:40 am ] |
| Post subject: | Re: 1 litre sj40 timing? |
It's on the flywheel where the inspection hole is. 10 deg btdc is the notch in the hole |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|